| Sizes | |
| Chamber Capacity | 25ml |
| Catheter Size | 10FG |
Specifications:
Volume: typically 6 mL, 7 mL, 10 mL, 20 mL, or 30 mL
Material: Borosilicate glass, polyethylene terephthalate (PET), or polypropylene
Cap type: Screw cap with or without liner (PE, PTFE, or foil-lined)
Height: approx. 55–75 mm (10 mL), 60–95 mm (20 mL)
Diameter: approx. 16 mm (10 mL), 27 mm (20 mL)
Temperature range: -20°C to 80°C (varied by material)
Specifications:
Material: Borosilicate glass or polypropylene (based on model)
Sizes: 250 mL, 500 mL, 1000 mL, 2000 mL
Chambers: three vertically aligned sections—top (acid), middle (solid reactant), bottom (liquid reservoir)
Valves: glass or plastic stopcocks for gas outlet control
Temperature resistance: up to 180°C (for glass models)
Chemical compatibility: resistant to acids and common laboratory reagents
Specifications:
Material: Medical-grade polypropylene or polystyrene
Capacity: 20 mL, 30 mL, 50 mL, 60 mL, 100 mL, or more
Cap type: Screw cap (flat or dome-top)
Sterility: Sterile or non-sterile (based on use)
Temperature resistance: up to 121°C (autoclavable if polypropylene)
Leak test: Conforms to standard sealing and transport safety guidelines
Specifications:
Material: Polystyrene (disposable), stainless steel or polypropylene (reusable)
Length: approximately 150 mm to 200 mm
Arm width: ~4 mm to 8 mm
Sterility: Sterile (gamma-irradiated or EO) or non-sterile
Autoclavable: Yes (reusable versions)
Tip style: Rounded for minimal agar damage
©2025-26. All Rights Reserved. Shresha Biortek
