Features:
Centralized control unit for managing all critical functions in a modular operation theatre
Flush-mounted design with smooth surface to maintain hygiene and sterility
User-friendly interface with tactile buttons or touchscreen for ease of operation
Customizable layout based on hospital or project requirements
Controls essential functions including medical gas alarm system, lighting, temperature, humidity, and clock systems
Digital display of parameters like room temperature, humidity level, time, and pressure
Integrated stopwatch and elapsed time indicator for surgical timing
Interlocking controls for electrical circuits, surgical lights, and ventilation systems
Audible and visual alarms for fault detection and system warnings
Microprocessor or PLC-based logic control for accuracy and reliability
Easy maintenance with modular, serviceable components
| Type: Configuration | Model | Description | Typical Specifications | Key Features |
|---|---|---|---|---|
| Operation Theatre Control Panel: Touchscreen PLC-Based | DR OTCP TSPLC | Digital control panel with 7” touchscreen and PLC for complete OT environment management. | Display: 7″ HMI Touch Control: PLC-based Power: 230V AC Interface: Modbus/BMS Mount: Flush wall-mounted |
– Centralized control – User-friendly interface – Programmable alerts – Password protection |
| Operation Theatre Control Panel: Membrane Type with Push Buttons | DR OTCP MB6F | Conventional push-button-based panel for managing 6 OT functions. | Functions: 6 (light, fan, temp, etc.) Material: SS304 front plate Indicators: LED Voltage: 230V AC |
– Cost-effective – Reliable and durable – Simple operation |
| Operation Theatre Control Panel: Hybrid Touch + Membrane | DR OTCP HTM | Combines membrane switches with a digital display for basic automation. | Display: Digital segment Switches: Membrane + tactile Enclosure: SS or powder-coated MS Size: 400×300 mm |
– Combines digital + manual – Semi-automated – Backlit buttons |
| Operation Theatre Control Panel: Glass Front Touchscreen | DR OTCP GFTS | Full glass front panel for high-end modular OTs with 10” touchscreen. | Display: 10” capacitive touch Material: Tempered glass Power: 230V Mounting: Recessed wall panel |
– Sleek design – Anti-bacterial surface – BMS compatible |
| Operation Theatre Control Panel: Nurse Station Interface Panel | DR OTCP NSIP | Wall-mounted panel allowing communication and control for nurses inside OT. | Functions: Intercom, Music, Timer, Lights Display: LED/Touchscreen Mount: Surface/flush Comms: Wired/wireless |
– Nurse call + communication – Music and clock integrated – Quick access panel |
| Operation Theatre Control Panel: HVAC & Light Integration Panel | DR OTCP HLI | Dedicated control unit for lighting and air handling unit inside OT. | Lighting: Dimming control HVAC: Temp display + setpoint Relay: 230V Display: Digital/Touch |
– HVAC & lighting in one unit – Alarm integration – SS housing |
| Operation Theatre Control Panel: Alarm & Timer Focused Unit | DR OTCP ATF | Compact unit focusing on elapsed time, clock, and critical OT alerts. | Timers: Elapsed, anesthesia Clock: 24hr format Alarms: OT door, gas Display: 3.5” digital LED |
– Ideal for retrofit – Easy wall installation – Low maintenance |
Digital Clock (24 hr)
Elapsed Time Indicator
Temperature & Humidity Display
HEPA Filter Status Alarm
Medical Gas Pressure Alarms
Lighting & Fan Control
Music System
Nurse Call / Intercom
Material: SS304, powder-coated CRCA, or toughened glass front
Mounting: Flush/recessed or wall-mounted
Interfaces: RS485, Modbus, BMS-ready, SCADA-compatible
| Type: Configuration | Model | Description | Typical Specifications | Key Features |
|---|---|---|---|---|
| Hermetically Sealed Sliding Door: Manual Single Leaf | DR H2SD MSL | Manually operated single-panel sliding door with hermetic seal for OTs and cleanrooms. | Size: 1200 x 2100 mm Leaf: Single Material: SS / HPL / Powder-coated GI Seal: Bottom + perimeter Opening: Manual push-pull |
– Smooth manual glide – Full hermetic sealing – Easy maintenance – Ideal for small OTs |
| Hermetically Sealed Sliding Door: Automatic Single-Leaf | DR H2SD ASL | Automated sliding door with sensor-based motion and full perimeter seal for infection control zones. | Drive: Microprocessor-controlled Size: 1200 x 2100 mm Opening Speed: 250–500 mm/sec Sensors: Infrared / microwave Power: 230V AC |
– Touchless operation – Hermetically sealed – Anti-crush safety – Silent motor |
| Hermetically Sealed Sliding Door: Automatic Double-Leaf | DR H2SD ADL | Wide-opening automatic dual-leaf sliding door for gurney and equipment movement. | Leaf Size: 2 x 1200 mm Total Opening: 2400 mm Material: SS304 / HPL Motor: Belt drive Sensors: Dual-zone presence sensor |
– Large clear opening – Double leaf automation – Medical-grade surface – Optional battery backup |
| Hermetically Sealed Sliding Door: Lead-Lined Radiation Proof | DR H2SD L2RF | Radiation-shielding sliding door for imaging/OT rooms with hermetic sealing. | Shielding: 2 mm Pb equivalence Leaf: SS/Lead/HPL composite Seal: 3-side hermetic Automation: Optional |
– X-ray/MRI compatible – Anti-radiation core – Smooth, quiet operation |
| Hermetically Sealed Sliding Door: Glass Panel with SS Frame | DR H2SD SPS | Transparent hermetic door with clear toughened glass for visibility between zones. | Glass: 10–12 mm toughened Frame: SS 304 Size: 1500 x 2100 mm Seal: Bottom drop seal Motor: Optional |
– Modern aesthetic – Visual access – Hermetic bottom seal – Cleanroom compliant |
| Hermetically Sealed Sliding Door: ICU/Isolation Room Bi-Parting | DR H2SD I2R2P | Bi-parting auto door system for ICU and isolation wards with negative pressure sealing. | Leaf Size: 2 x 1000 mm Motor: Low-noise linear motor Controls: Touchless switch Finish: Antibacterial HPL or SS |
– Suited for ICU/clean zones – Pressure integrity – Hands-free access |
| Hermetically Sealed Sliding Door: Fire Rated with Hermetic Seal | DR H2SD FRS | Sliding door certified for fire safety and hermetic sealing up to 60 minutes. | Fire Rating: EI60 Seal: Intumescent + hermetic Core: Rockwool + GI Automation: Available |
– Fire-resistant – Sealed for smoke/gas – Fire-rated glazing optional |
Access control (RFID, keypad, facial recognition)
Battery backup for motor
Touchless sensors and foot switches
Door status indicator lights (Red/Green)
Vision panels or X-ray safe glass
Cleanroom-rated antibacterial coatings
| Type | Model | Description | Specifications | Features |
| Wall-Mounted | DR H3S SS 1 | Single-user stainless steel scrub station | 304 SS, 36″ wide, hands-free sensor | IR sensor tap, knee-operated soap, backsplash panel |
| Double Basin | DR H3S DS 2 | Two-person scrub station | Dual 24″ basins, 16-gauge SS | Timer faucet, antimicrobial coating, soap dispensers |
| Triple Basin | DR H3S TS 3 | Multi-user high-traffic scrub sink | 72″ long, three compartments, wall mounted | Infrared faucet, auto-temp control, elbow soap |
| Mobile Unit | DR H3S MU 1 | Portable scrub station for temporary setups | Compact, wheels with locks, 20L water tanks | Foot pump, removable tanks, integrated storage |
| Compact Corner | DR H3S CC 1 | Space-saving corner scrub sink | Triangular SS build, 30″ sides | Elbow-operated faucet, splash guard, compact form |
| Recessed Model | DR H3S RM 1 | Flush-mounted unit for minimal intrusion | Built-in wall unit, SS front panel | Infrared faucet, soap niche, sleek design |
| Type | Model NO | Description | Specifications | Features |
|---|---|---|---|---|
| Standard IVF OT | DR ORIVF BMS | Entry-level OT for small to mid-sized IVF clinics. | Size: 200–300 sq.ft. Wall: HPL/SS Panels Floor: Antistatic vinyl HVAC: HEPA @ 0.3µ Lighting: 600 lux LED |
– Cost-effective – Laminar airflow – Integrated IVF lab support – Low maintenance |
| Advanced IVF OT | DR ORIVF EL | Includes OT and adjacent IVF laboratory. | Size: 300–500 sq.ft. Wall: SS304 with HPL cladding HVAC: ISO Class 7 Temp: 21–23°C Humidity: 45–55% |
– Seamless lab-OT operation – Pass box integration – Modular cleanroom walls – Pressure differential system |
| IVF Clean Room OT | DR ORIVF 1000CC | High-grade cleanroom OT for embryo transfer & ICSI. | ISO Class 6–7 HEPA: 99.997%@0.3µ Air changes: >25/hr Floor: Conductive ESD tiles |
– ISO-compliant air filtration – Epoxy-coated surfaces – Contamination control – Data logging systems |
| Mobile IVF OT | DR ORIVF PTU | Portable modular OT for remote or tier-2 city clinics. | Fully contained unit Power: Generator + UPS Built-in HVAC Size: ~300 sq.ft. |
– Transportable – All-in-one setup – Minimal installation – Quick deployment |
| Smart IVF OT | DR ORIVF IOT | Digitally integrated IVF OT with monitoring systems. | Real-time temp/humidity monitoring Integrated BMS Access control Surveillance |
– Remote monitoring – Live streaming of procedures – Touchless controls – IVF-specific software systems |
| Hybrid IVF OT | DR ORIVF OTPIR | Combines IVF OT with ultrasound & cryo-storage. | Imaging: Integrated USG Cooling: Cryogenic storage LED OT lights: 160,000 lux Modular partitions |
– Imaging + storage in OT – Advanced ventilation – One-way workflow – Seamless operation |
| HEPA Ceiling Modular OT | DR ORIVF LFC | Focuses on air cleanliness at the embryo work zone. | HEPA ceiling panels Vertical laminar flow FFU modules Air pressure >15 Pa |
– Max contamination control – Quiet FFU operation – Low particulate count – Ideal for embryo handling |
| Bio-safe IVF OT | DR ORIVF AMC | Prioritizes infection control & sterility. | Antimicrobial paint Flush doors UV-resistant fixtures SS304 touchpoints |
– Easy sterilization – Inbuilt biohazard control – Seamless corners – Anti-bacterial surfaces |
| Type | Model | Description | Specifications | Features |
|---|---|---|---|---|
| PLA | DR HTB PLA 1.75 | Biodegradable thermoplastic derived from renewable resources. | Diameter: 1.75mm ±0.03mm Temp: 180–210°C Bed: 0–60°C |
– Easy to print – Low warping – Great surface finish – Minimal odor |
| PLA | DR HTB PLA3 | Same as above but with 3.00mm filament diameter. | Diameter: 3.00mm ±0.03mm Temp: 180–210°C Bed: 0–60°C |
– For 3.00mm extruders – Eco-friendly – Consistent extrusion |
| ABS | DR HTB ABS1.75 | Petroleum-based plastic with strong, durable properties. | Diameter: 1.75mm ±0.03mm Temp: 210–240°C Bed: 80–110°C |
– High strength – Heat resistant – Slightly flexible |
| PETG | DR HTB PETG1.75 | Strong and flexible like ABS, but easier to print. | Diameter: 1.75mm ±0.03mm Temp: 230–250°C Bed: 70–90°C |
– Durable and tough – Water resistant – Glossy finish |
| Wood PLA | DR HTB WFPLA | PLA infused with fine wood particles for a wood-like finish. | Diameter: 1.75mm ±0.03mm Temp: 190–220°C Bed: 0–60°C |
– Wood grain texture – Sandable and stainable – Natural appearance |
| Glow in the Dark PLA | DR HTB GPLA | PLA that glows after absorbing light. | Diameter: 1.75mm ±0.03mm Temp: 190–220°C Bed: 0–60°C |
– Emits glow in dark – Good layer adhesion – Fun for decorative items |
| Flexible TPU | DR HTB TPU1.75 | Flexible thermoplastic polyurethane for elastic parts. | Diameter: 1.75mm ±0.05mm Temp: 200–230°C Bed: 40–60°C |
– High flexibility – Impact and abrasion resistant – Smooth extrusion |
| Silk PLA | DR HTB SPLA | PLA with silky, shiny finish. Ideal for aesthetic prints. | Diameter: 1.75mm ±0.03mm Temp: 190–220°C Bed: 0–60°C |
– Metallic sheen – High visual impact – No post-processing needed |
| Carbon Fiber PLA | DR HTB CPLA | PLA reinforced with carbon fibers for extra strength. | Diameter: 1.75mm ±0.03mm Temp: 200–230°C Bed: 50–60°C |
– Lightweight – Stiff and strong – Matte finish |
| Metal PLA | DR HTB BCPLA | PLA blended with metal powder for heavy, metallic prints. | Diameter: 1.75mm ±0.03mm Temp: 195–220°C Bed: 0–60°C |
– Metallic appearance – Polishable – Heavier than standard PLA |
©2025-26. All Rights Reserved. Shresha Biortek
