Features:
Designed to facilitate the safe and controlled transfer of materials between two clean environments
Minimizes cross-contamination by isolating the two environments during material transfer
Constructed with smooth, easy-to-clean surfaces for maintaining hygiene
Double-door interlocking system prevents both doors from opening simultaneously
Mechanical or electronic door interlock systems available based on model
Transparent acrylic or tempered glass viewing panel for easy monitoring without opening the box
Stainless steel or powder-coated metal construction ensures durability and chemical resistance
Optional UV light integration for additional decontamination before transfer
Available with mechanical, electromechanical, or programmable control systems
Commonly used in pharmaceutical, laboratory, hospital, and cleanroom environments
| Type | Model | Description | Specifications | Features |
|---|---|---|---|---|
| PLA | DR HTB PLA 1.75 | Biodegradable thermoplastic derived from renewable resources. | Diameter: 1.75mm ±0.03mm Temp: 180–210°C Bed: 0–60°C |
– Easy to print – Low warping – Great surface finish – Minimal odor |
| PLA | DR HTB PLA3 | Same as above but with 3.00mm filament diameter. | Diameter: 3.00mm ±0.03mm Temp: 180–210°C Bed: 0–60°C |
– For 3.00mm extruders – Eco-friendly – Consistent extrusion |
| ABS | DR HTB ABS1.75 | Petroleum-based plastic with strong, durable properties. | Diameter: 1.75mm ±0.03mm Temp: 210–240°C Bed: 80–110°C |
– High strength – Heat resistant – Slightly flexible |
| PETG | DR HTB PETG1.75 | Strong and flexible like ABS, but easier to print. | Diameter: 1.75mm ±0.03mm Temp: 230–250°C Bed: 70–90°C |
– Durable and tough – Water resistant – Glossy finish |
| Wood PLA | DR HTB WFPLA | PLA infused with fine wood particles for a wood-like finish. | Diameter: 1.75mm ±0.03mm Temp: 190–220°C Bed: 0–60°C |
– Wood grain texture – Sandable and stainable – Natural appearance |
| Glow in the Dark PLA | DR HTB GPLA | PLA that glows after absorbing light. | Diameter: 1.75mm ±0.03mm Temp: 190–220°C Bed: 0–60°C |
– Emits glow in dark – Good layer adhesion – Fun for decorative items |
| Flexible TPU | DR HTB TPU1.75 | Flexible thermoplastic polyurethane for elastic parts. | Diameter: 1.75mm ±0.05mm Temp: 200–230°C Bed: 40–60°C |
– High flexibility – Impact and abrasion resistant – Smooth extrusion |
| Silk PLA | DR HTB SPLA | PLA with silky, shiny finish. Ideal for aesthetic prints. | Diameter: 1.75mm ±0.03mm Temp: 190–220°C Bed: 0–60°C |
– Metallic sheen – High visual impact – No post-processing needed |
| Carbon Fiber PLA | DR HTB CPLA | PLA reinforced with carbon fibers for extra strength. | Diameter: 1.75mm ±0.03mm Temp: 200–230°C Bed: 50–60°C |
– Lightweight – Stiff and strong – Matte finish |
| Metal PLA | DR HTB BCPLA | PLA blended with metal powder for heavy, metallic prints. | Diameter: 1.75mm ±0.03mm Temp: 195–220°C Bed: 0–60°C |
– Metallic appearance – Polishable – Heavier than standard PLA |
| Type: Configuration | Model | Description | Typical Specifications | Key Features |
|---|---|---|---|---|
| Hermetically Sealed Sliding Door: Manual Single Leaf | DR H2SD MSL | Manually operated single-panel sliding door with hermetic seal for OTs and cleanrooms. | Size: 1200 x 2100 mm Leaf: Single Material: SS / HPL / Powder-coated GI Seal: Bottom + perimeter Opening: Manual push-pull |
– Smooth manual glide – Full hermetic sealing – Easy maintenance – Ideal for small OTs |
| Hermetically Sealed Sliding Door: Automatic Single-Leaf | DR H2SD ASL | Automated sliding door with sensor-based motion and full perimeter seal for infection control zones. | Drive: Microprocessor-controlled Size: 1200 x 2100 mm Opening Speed: 250–500 mm/sec Sensors: Infrared / microwave Power: 230V AC |
– Touchless operation – Hermetically sealed – Anti-crush safety – Silent motor |
| Hermetically Sealed Sliding Door: Automatic Double-Leaf | DR H2SD ADL | Wide-opening automatic dual-leaf sliding door for gurney and equipment movement. | Leaf Size: 2 x 1200 mm Total Opening: 2400 mm Material: SS304 / HPL Motor: Belt drive Sensors: Dual-zone presence sensor |
– Large clear opening – Double leaf automation – Medical-grade surface – Optional battery backup |
| Hermetically Sealed Sliding Door: Lead-Lined Radiation Proof | DR H2SD L2RF | Radiation-shielding sliding door for imaging/OT rooms with hermetic sealing. | Shielding: 2 mm Pb equivalence Leaf: SS/Lead/HPL composite Seal: 3-side hermetic Automation: Optional |
– X-ray/MRI compatible – Anti-radiation core – Smooth, quiet operation |
| Hermetically Sealed Sliding Door: Glass Panel with SS Frame | DR H2SD SPS | Transparent hermetic door with clear toughened glass for visibility between zones. | Glass: 10–12 mm toughened Frame: SS 304 Size: 1500 x 2100 mm Seal: Bottom drop seal Motor: Optional |
– Modern aesthetic – Visual access – Hermetic bottom seal – Cleanroom compliant |
| Hermetically Sealed Sliding Door: ICU/Isolation Room Bi-Parting | DR H2SD I2R2P | Bi-parting auto door system for ICU and isolation wards with negative pressure sealing. | Leaf Size: 2 x 1000 mm Motor: Low-noise linear motor Controls: Touchless switch Finish: Antibacterial HPL or SS |
– Suited for ICU/clean zones – Pressure integrity – Hands-free access |
| Hermetically Sealed Sliding Door: Fire Rated with Hermetic Seal | DR H2SD FRS | Sliding door certified for fire safety and hermetic sealing up to 60 minutes. | Fire Rating: EI60 Seal: Intumescent + hermetic Core: Rockwool + GI Automation: Available |
– Fire-resistant – Sealed for smoke/gas – Fire-rated glazing optional |
Access control (RFID, keypad, facial recognition)
Battery backup for motor
Touchless sensors and foot switches
Door status indicator lights (Red/Green)
Vision panels or X-ray safe glass
Cleanroom-rated antibacterial coatings
©2025-26. All Rights Reserved. Shresha Biortek PVT LTD
