The I.V. Cannula HE-Can has been designed specially with wings and without an injection port, for special necessities of infusional therapy. 6% luer taper for compatibility with any International product. It ensures pain free & smooth penetration.
| Size | Colour | Water Flow Rate |
| (ml./min.) | ||
| 14G | Orange | 270 |
| 16G | Grey | 180 |
| 17G | White | 125 |
| 18G | Green | 80 |
| 20G | Pink | 54 |
| 22G | Blue | 33 |
| 24G | Yellow | 20 |
Specifications:
Volume: typically 6 mL, 7 mL, 10 mL, 20 mL, or 30 mL
Material: Borosilicate glass, polyethylene terephthalate (PET), or polypropylene
Cap type: Screw cap with or without liner (PE, PTFE, or foil-lined)
Height: approx. 55–75 mm (10 mL), 60–95 mm (20 mL)
Diameter: approx. 16 mm (10 mL), 27 mm (20 mL)
Temperature range: -20°C to 80°C (varied by material)
Specifications:
Material: Borosilicate glass or polypropylene (based on model)
Sizes: 250 mL, 500 mL, 1000 mL, 2000 mL
Chambers: three vertically aligned sections—top (acid), middle (solid reactant), bottom (liquid reservoir)
Valves: glass or plastic stopcocks for gas outlet control
Temperature resistance: up to 180°C (for glass models)
Chemical compatibility: resistant to acids and common laboratory reagents
Specifications:
Material: Medical-grade polypropylene or polystyrene
Capacity: 30 mL, 50 mL, 60 mL, or 100 mL
Cap type: Screw cap
Sterility: Sterile or non-sterile (based on version)
Temperature resistance: up to 121°C (autoclavable, if polypropylene)
Leak test: Conforms to standard leakage resistance for sample transport
Specifications:
Material: Polypropylene, polyethylene, or high-density polyurethane
Capacity: 1 L, 2 L, 4 L, 5 L.
Insulation: Double-walled or foam-insulated
Temperature range: -80°C to 100°C (varies by model)
Dimensions: varies by capacity
Lid type: optional snap-on or loose-fit cover
©2025-26. All Rights Reserved. Shresha Biortek
