Specifications:
Material: Polycarbonate, polypropylene, or cardboard with water-repellent coating
Capacity: 25, 40, 81, or 100 cryo vials
Compatibility: 1.0 mL to 5.0 mL cryo vials
Dimensions: 133 mm × 133 mm × 52 mm (for standard 100-place box)
Temperature range: -196°C to 121°C
Grid format: 5×5, 8×8, 9×9, or 10×10 layout (based on model)
Specifications:
Material: Polycarbonate, polypropylene, or cardboard with water-repellent coating
Capacity: 25, 40, 81, or 100 cryo vials
Compatibility: 1.0 mL to 5.0 mL cryo vials
Dimensions: 133 mm × 133 mm × 52 mm (for standard 100-place box)
Temperature range: -196°C to 121°C
Grid format: 5×5, 8×8, 9×9, or 10×10 layout (based on model)
Specifications:
Material: Polypropylene or closed-cell polyethylene foam
Tube compatibility: 0.2 mL to 2.0 mL microcentrifuge tubes or cryovials
Capacity: typically 8, 12, 18, or 24 tubes
Dimensions: approx. 80–150 mm width or diameter (varied by model)
Temperature range: -20°C to 100°C
Tube hole diameter: approx. 6–11 mm
Specifications:
Volume: typically 0.5 mL to 50 mL
Material: Polypropylene or polyethylene
Cap type: Screw cap with or without O-ring, snap cap, or plug seal
Temperature range: -80°C to 121°C
Dimensions: varies by volume (e.g., 1.5 mL vial approx. 11 mm diameter × 45 mm height)
Graduation interval: varies, commonly every 0.1 mL or 0.5 mL
Specifications:
Material: Polypropylene (PP)
Capacity: 25, 81, or 100 cryo vials
Compatibility: 1.0 mL to 5.0 mL cryo vials
Dimensions: 133 mm × 133 mm × 52 mm (for 100-place box)
Grid layout: 5×5, 9×9, or 10×10 configuration
Temperature range: -90°C to 121°C
Specifications:
Material: Polystyrene, polypropylene, or polyethylene
Capacity: 25 mL, 50 mL, 100 mL, or 150 mL
Bottom type: flat, V-bottom, or sloped
Compatibility: suitable for manual or automated liquid handling systems
Temperature resistance: up to 121°C (for polypropylene, autoclavable)
Sterilization method (for sterile versions): gamma irradiation or ethylene oxide
©2025-26. All Rights Reserved. Shresha Biortek PVT LTD
