Features:
Designed for holding and dispensing liquid reagents in laboratory procedures
Commonly used with multichannel pipettes for efficient reagent transfer
Sloped or V-bottom design reduces dead volume and allows complete reagent recovery
Wide, stable base prevents tipping and enhances ease of use
Graduated markings for volume estimation
Available in sterile and non-sterile versions
Stackable and often provided with lids or covers to minimize contamination
Disposable and reusable options based on application
Specifications:
Material: Polystyrene, polypropylene, or polyethylene
Capacity: 25 mL, 50 mL, 100 mL, or 150 mL
Bottom type: flat, V-bottom, or sloped
Compatibility: suitable for manual or automated liquid handling systems
Temperature resistance: up to 121°C (for polypropylene, autoclavable)
Sterilization method (for sterile versions): gamma irradiation or ethylene oxide
Specifications:
Volume: typically 1.0 mL, 1.5 mL, 2.0 mL, 4.0 mL, or 5.0 mL
Material: Medical-grade polypropylene
Temperature range: down to -196°C (in vapor phase liquid nitrogen)
Cap type: External or internal thread with O-ring seal
Dimensions: varies by volume; e.g., 2.0 mL vial ~12.5 mm diameter × 48 mm height
Max RCF: up to 17,000 x g (varied by model)
Specifications:
Material: Polypropylene
Capacity: 96, 100, or 200 tips per box (based on model)
Tip compatibility: 0.1 µL to 1000 µL
Dimensions: approx. 125 mm × 85 mm × 45 mm (varies by size and type)
Temperature range: -20°C to 121°C
Lid type: snap-fit or hinged
Specifications:
Material: Polypropylene, polyethylene, or high-density polyurethane
Capacity: 1 L, 2 L, 4 L, 5 L.
Insulation: Double-walled or foam-insulated
Temperature range: -80°C to 100°C (varies by model)
Dimensions: varies by capacity
Lid type: optional snap-on or loose-fit cover
Specifications:
Material: Medical-grade polypropylene or polystyrene
Capacity: 20 mL, 30 mL, 50 mL, 60 mL, 100 mL, or more
Cap type: Screw cap (flat or dome-top)
Sterility: Sterile or non-sterile (based on use)
Temperature resistance: up to 121°C (autoclavable if polypropylene)
Leak test: Conforms to standard sealing and transport safety guidelines
©2025-26. All Rights Reserved. Shresha Biortek
