REFRIGERATING CIRCULATION BATH

Model	DR-RCB-6	DR-RCB-12
Make	DR Labs	DR Labs
Temp. Control Range	-20°C ~ 100°C	-20°C ~ 100°C
Temp. Resolution	0.01°C	0.01°C
Temp. Accuracy	±0.05°C	±0.05°C
Temp. Control	Microprocessor PID	Microprocessor PID
Display	LCD	LCD
Refrigeration Model	Air cooled refrigeration through compressor	Air cooled refrigeration through compressor
Refrigerant	R134A	R134A
Pump Circulation	Internal & External	Internal & External
Temp. Sensor	PT-100	PT-100
Pump Flow Rate	6L/min	6L/min
Tank Capacity	6L	12 L
Tank Size	250 x 200 x 150 mm	300 x 250 x 200 mm
Bath Opening	180 x 140 mm	235 x 160 mm
Bath Depth	150 mm	200 mm
Power Supply	AC 220 V / 50 Hz	AC 220 V / 50 Hz
Dimensions	320 x 370 x 655 mm	320 x 370 x 765 mm
Packing Dimensions & Weight	530 x 450 x 800 mm & 44 kgs	530 x 450 x 900 mm & 50 kgs

Model

DR-RCB-6

DR-RCB-12

Make

DR Labs

Temp. Control Range

-20°C ~ 100°C

Temp. Resolution

0.01°C

Temp. Accuracy

±0.05°C

Temp. Control

Microprocessor PID

Display

LCD

Refrigeration Model

Air cooled refrigeration through compressor

Refrigerant

R134A

Pump Circulation

Internal & External

Temp. Sensor

PT-100

Pump Flow Rate

6L/min

Tank Capacity

12 L

Tank Size

250 x 200 x 150 mm

300 x 250 x 200 mm

Bath Opening

180 x 140 mm

235 x 160 mm

Bath Depth

150 mm

200 mm

Power Supply

AC 220 V / 50 Hz

Dimensions

320 x 370 x 655 mm

320 x 370 x 765 mm

Packing Dimensions & Weight

530 x 450 x 800 mm & 44 kgs

530 x 450 x 900 mm & 50 kgs

Model	DR-MC-15
Make	DR Labs
Speed Range	500~15000 RPM
Speed Increament	100 RPM
Max. RCF (x g)	15100, increment: 100
Speed Accuracy	±20
Rotor Capacity	0.2ml/0.5ml/1.5ml/ 2ml×12
Timer	Timer: 30s~99 min
Motor	Brushless DC Motor
Safety Features Noise	Door interlock, Over-speed detection, Over-temperature detection, Automatic internal diagnosis
Acceleration/Brake Time	Acceleration: 30s, Braking:10s
Power Supply	AC 220V / 50Hz
Dimension	256 x 225 x 155 mm & 6 kg
Weight	6 kgs

TECHNICAL PARAMETERS:

Parameter	DR-04WB	DR-06WB
Column	2 rows 4 holes	2 rows 6 holes
Temp. range	Rt+5~100℃
Temp. Resolution Ratio	0.1℃
Temp. Motion	±0.5℃
Temp. Uniformity	±1℃
Water sink	Stainless steel, surface electrolysis treatment
Outer shell	Cold rolled steel plate, surface electrostatic powder spray.
Heater	Stainless steel U-type heating tube
Power rating	1200 W
Temp. control mode	PID Controller
Timer	0 – 999 min（with timing function）
Timing function	Timing function, auto stop feature
Program	Optional: multi-section program control
Additional function	Deviation correction, menu key lock, power failure back-up, power-off parameter memory, PID-Tunable control
Sensor	Thermal resistor
Safety device	Over-temperature alarm, short-circuit protection.
Inner Chamber size(WLH)	305 x 305 x 130 mm	305 x 470 x 130 mm
Packing size (WLH)	415 x 415 x 275 mm	400 x 560 x 250 mm
Internal volume	12 L	18.6 L
Cover number per hole	∅120 mm
Power Supply 50/60Hz	220V, 50/60 Hz
Weight	6.5 kg	8 kg

Item Name	CO2 Incubator
Model No.	DR-CO2-80UV	DR-CO2-80	DR-CO2-80+	DR-CO2-180UV	DR-CO2-180	DR-CO2-180+
Sterilization	UV	140°C	180°C	UV	140°C	180°C
Volume	80L	80L	80L	180L	180L	180L
Microprocessor-based controller	Proprietary algorithm to control CO2 and temperature
Display	LCD touch display
Temp control range	Ambient +5°C- 60°C
Temp stability	±0.1°C
Temp field uniformity	±0.3°C (at 37°C )
Timer function	0 – 999hr 59 min.
CO2 measurement principle	Infrared (IR) detection
CO2 control range	0-20%
CO2 display resolution	0.10%
CO2 supply	0.05~0.1MPa is recommended
Relative Humidity	Ambient humidity ~95% at 37°C
HEPA filtration	HEPA filters at the gas inlet, ISO 5 level, 5 minutes
Temperature recovery time	≤10 min (open door 30sec room temperature 25°C set value 37°C)
O2 concentration recovery time	≤5 min (open the door 30sec set value 5%)
MOC	The inner chamber is made up of stainless steel and outer chamber with MS with powder coating
Light	Florescent light
Historical data storage	250,000 messages
Data export interface	USB interface
Scalability	Up to 2 units can be stacked.
Working environment temperature	18~30°C
Power supply	230V±10%, 50~60Hz
Inner Dimensions (L x D x H) mm	450x450x450			550x600x600
Outer Dimensions (L x D x H) mm	650x650x750			750x800x850

Temperature range	5°C to 60°C
Temperature accuracy	±0.2°C @37°C
Temperature controller	Dual display PID controller Display SV & PV Auto tuning feature
Temperature sensor	PT100
Inner chamber	SS 304
External cabinet	Powder coated GI sheet
Insulation	Glass wool
Door	Insulated door Mechanical latch/clamp Glass window
Heaters	Resistance wire heaters
Shelves	SS wire mesh (removable)
Air circulation	Motorized blower / Axial fan
Standard fittings	Mains on/off switch Load Indicator Fan on/off switch
Power supply	220 Volts 50Hz
Optional	– Calibration certificate – Data logger w/ USB – Interface thermal printer. – Inner chamber LED light.