| Type | Model | Description | Specifications | Features |
|---|---|---|---|---|
| PLA | DR HTB PLA 1.75 | Biodegradable thermoplastic derived from renewable resources. | Diameter: 1.75mm ±0.03mm Temp: 180–210°C Bed: 0–60°C |
– Easy to print – Low warping – Great surface finish – Minimal odor |
| PLA | DR HTB PLA3 | Same as above but with 3.00mm filament diameter. | Diameter: 3.00mm ±0.03mm Temp: 180–210°C Bed: 0–60°C |
– For 3.00mm extruders – Eco-friendly – Consistent extrusion |
| ABS | DR HTB ABS1.75 | Petroleum-based plastic with strong, durable properties. | Diameter: 1.75mm ±0.03mm Temp: 210–240°C Bed: 80–110°C |
– High strength – Heat resistant – Slightly flexible |
| PETG | DR HTB PETG1.75 | Strong and flexible like ABS, but easier to print. | Diameter: 1.75mm ±0.03mm Temp: 230–250°C Bed: 70–90°C |
– Durable and tough – Water resistant – Glossy finish |
| Wood PLA | DR HTB WFPLA | PLA infused with fine wood particles for a wood-like finish. | Diameter: 1.75mm ±0.03mm Temp: 190–220°C Bed: 0–60°C |
– Wood grain texture – Sandable and stainable – Natural appearance |
| Glow in the Dark PLA | DR HTB GPLA | PLA that glows after absorbing light. | Diameter: 1.75mm ±0.03mm Temp: 190–220°C Bed: 0–60°C |
– Emits glow in dark – Good layer adhesion – Fun for decorative items |
| Flexible TPU | DR HTB TPU1.75 | Flexible thermoplastic polyurethane for elastic parts. | Diameter: 1.75mm ±0.05mm Temp: 200–230°C Bed: 40–60°C |
– High flexibility – Impact and abrasion resistant – Smooth extrusion |
| Silk PLA | DR HTB SPLA | PLA with silky, shiny finish. Ideal for aesthetic prints. | Diameter: 1.75mm ±0.03mm Temp: 190–220°C Bed: 0–60°C |
– Metallic sheen – High visual impact – No post-processing needed |
| Carbon Fiber PLA | DR HTB CPLA | PLA reinforced with carbon fibers for extra strength. | Diameter: 1.75mm ±0.03mm Temp: 200–230°C Bed: 50–60°C |
– Lightweight – Stiff and strong – Matte finish |
| Metal PLA | DR HTB BCPLA | PLA blended with metal powder for heavy, metallic prints. | Diameter: 1.75mm ±0.03mm Temp: 195–220°C Bed: 0–60°C |
– Metallic appearance – Polishable – Heavier than standard PLA |
©2025-26. All Rights Reserved. Shresha Biortek
