| Model | Â DR316L |
| Type | Â Cold Box, Long Range |
| WHO PQS CODE | Â E004/024 |
| Vaccine Storage Capacity As per Standard PQS load | Â 18.0 Litres |
| Gross Storage Capacity | Â 23.70 Litres |
| Weight-Fully Loaded | Â 47.86kg |
| Weight-Empty (with empty Ice Packs) | Â 20.78kg |
| External Surface Material | Â LLDPE (Linear Low Density Polyethylene) |
| Internal Lining Material | Â LLDPE (Linear Low Density Polyethylene) |
| Insulation Material | Â CFC Free Polyurethane |
| Insulation Thickness | Â 100mm |
| External Dimension (L X W XH) | Â 77,00 x 61,80 x 51,30cm |
| Internal Dimension (L X W XH) | Â 52,90 x 37,50 x 30,00cm |
| Vaccine Storage Dimensions | Â 44,20 x 29,30 x 18,30cm |
| Lid Type & Fixings | Â Hinged |
| Number of Ice-packs Required | Â 31 |
| Number of Ice-packs Supplied | Â 31 |
| Ice-pack type | Â 0.6L compliant with PQS E0S/IP0I.1 |
| Volume of Ice-pack | Â 0.4 Litres |
| Performance | Â Min. Cold Life Std. Req. 96hrs |
| WHO PQS Reference Number | Â E04/CB01.1 |
| Cold life without opening at +43°C |  145 hrs 51 minutes |
| Warm Life at -20° C |  57 hrs 41 minutes |
| Cool Life at +43° C |  34 hrs 35 minutes |
Specifications:
Volume: typically 6 mL, 7 mL, 10 mL, 20 mL, or 30 mL
Material: Borosilicate glass, polyethylene terephthalate (PET), or polypropylene
Cap type: Screw cap with or without liner (PE, PTFE, or foil-lined)
Height: approx. 55–75 mm (10 mL), 60–95 mm (20 mL)
Diameter: approx. 16 mm (10 mL), 27 mm (20 mL)
Temperature range: -20°C to 80°C (varied by material)
Specifications:
Volume: typically 1.0 mL, 1.5 mL, 2.0 mL, 4.0 mL, or 5.0 mL
Material: Medical-grade polypropylene
Temperature range: down to -196°C (in vapor phase liquid nitrogen)
Cap type: External or internal thread with O-ring seal
Dimensions: varies by volume; e.g., 2.0 mL vial ~12.5 mm diameter × 48 mm height
Max RCF: up to 17,000 x g (varied by model)
Specifications:
Material: Medical-grade polypropylene or polystyrene
Capacity: 20 mL, 30 mL, 50 mL, 60 mL, 100 mL, or more
Cap type: Screw cap (flat or dome-top)
Sterility: Sterile or non-sterile (based on use)
Temperature resistance: up to 121°C (autoclavable if polypropylene)
Leak test: Conforms to standard sealing and transport safety guidelines
Specifications:
Material: Polystyrene (disposable), stainless steel or polypropylene (reusable)
Length: approximately 150 mm to 200 mm
Arm width: ~4 mm to 8 mm
Sterility: Sterile (gamma-irradiated or EO) or non-sterile
Autoclavable: Yes (reusable versions)
Tip style: Rounded for minimal agar damage
©2025-26. All Rights Reserved. Shresha Biortek
