Features:
Conical bottom design for optimal pellet formation and sample recovery
Secure, leak-resistant caps for safe centrifugation
Molded graduation marks for precise volume measurements
Available in sterile and non-sterile formats
Transparent body for clear visibility of contents
Suitable for both storage and centrifugation
Resistant to most chemicals and solvents
Autoclavable and freezable
Compatible with standard centrifuge rotors (varied based on model)
Offered with flat or dome caps (optional)
Specifications:
Volume capacities: 15 mL, 50 mL
Material: High-quality polypropylene
Temperature range: -80°C to 121°C
Max RCF: up to 12,000 x g or 20,000 x g (varied based on model)
Graduation interval: typically 0.5 mL for 15 mL, 1.0 mL for 50 mL
Tube diameter: approx. 17 mm (15 mL), 30 mm (50 mL)
Tube length: approx. 120 mm (15 mL), 115 mm (50 mL with cap)
Cap type: screw cap with sealing ring or plug seal (optional)
Specifications:
Volume: typically 6 mL, 7 mL, 10 mL, 20 mL, or 30 mL
Material: Borosilicate glass, polyethylene terephthalate (PET), or polypropylene
Cap type: Screw cap with or without liner (PE, PTFE, or foil-lined)
Height: approx. 55–75 mm (10 mL), 60–95 mm (20 mL)
Diameter: approx. 16 mm (10 mL), 27 mm (20 mL)
Temperature range: -20°C to 80°C (varied by material)
Specifications:
Material: Borosilicate glass or polypropylene (based on model)
Sizes: 250 mL, 500 mL, 1000 mL, 2000 mL
Chambers: three vertically aligned sections—top (acid), middle (solid reactant), bottom (liquid reservoir)
Valves: glass or plastic stopcocks for gas outlet control
Temperature resistance: up to 180°C (for glass models)
Chemical compatibility: resistant to acids and common laboratory reagents
Specifications:
Material: Medical-grade polypropylene or polystyrene
Capacity: 30 mL, 50 mL, 60 mL, or 100 mL
Cap type: Screw cap
Sterility: Sterile or non-sterile (based on version)
Temperature resistance: up to 121°C (autoclavable, if polypropylene)
Leak test: Conforms to standard leakage resistance for sample transport
Specifications:
Material: Polypropylene or PTFE (reusable); autoclavable
Length: ~60 mm to 75 mm
Tip type: Smooth or ribbed (for enhanced grinding)
Compatibility: 1.5 mL or 2.0 mL microcentrifuge tubes
Sterility: Non-sterile or sterile (depending on version)
Temperature resistance: Up to 121°C
©2025-26. All Rights Reserved. Shresha Biortek PVT LTD
