Features:
Long, graduated glass or plastic tube with a stopcock at the bottom
Delivers precise volumes of liquid during titration
Fine control over liquid flow using the stopcock
Mounted vertically on a stand for accurate readings
Clear markings for easy volume measurement
Used in quantitative chemical analysis, especially titrations
Transparent body for visibility of liquid level and air bubbles
Easy to clean and refill between uses
Specifications:
Material: Borosilicate glass or plastic (e.g., polycarbonate, acrylic)
Capacity: Common sizes are 25 mL, 50 mL, and 100 mL
Graduations: Precise, with subdivisions as small as 0.1 mL
Stopcock: Glass or PTFE (Teflon) for smooth, chemical-resistant operation
Accuracy: Class A or Class B based on tolerance standards
Mounting: Requires burette clamp and stand
Filling method: Manual or via automatic burette filler
Temperature resistance: High for glass; lower for plastic
Sterilization: Glass burettes are autoclavable; plastic burettes depend on material
Specifications:
Material: Polypropylene, high-density polyethylene (HDPE), or wire-coated metal
Capacity: typically 20, 40, or 60 vials (varied based on model)
Vial diameter compatibility: approx. 16 mm to 28 mm
Rack dimensions: approx. 200–350 mm length, 80–150 mm width, 30–100 mm height
Temperature range: -20°C to 100°C
Specifications:
Material: Polypropylene
Capacity: 96, 100, or 200 tips per box (based on model)
Tip compatibility: 0.1 µL to 1000 µL
Dimensions: approx. 125 mm × 85 mm × 45 mm (varies by size and type)
Temperature range: -20°C to 121°C
Lid type: snap-fit or hinged
Specifications:
Material: Medical-grade polypropylene or polystyrene
Capacity: 30 mL, 50 mL, 60 mL, or 100 mL
Cap type: Screw cap
Sterility: Sterile or non-sterile (based on version)
Temperature resistance: up to 121°C (autoclavable, if polypropylene)
Leak test: Conforms to standard leakage resistance for sample transport
Specifications:
Material: Medical-grade polypropylene or polystyrene
Capacity: 20 mL, 30 mL, 50 mL, 60 mL, 100 mL, or more
Cap type: Screw cap (flat or dome-top)
Sterility: Sterile or non-sterile (based on use)
Temperature resistance: up to 121°C (autoclavable if polypropylene)
Leak test: Conforms to standard sealing and transport safety guidelines
Welcome Back 👋
Sign in to access your account and continue where you left off.
Welcome aboard 🚀
Create your account to access everything you need.
Added to cart
Check out our shop to see what's available
