| Sizes | |
| Bag Capacity | 2000ml |
| Tube Length | 90cm |
Specifications:
Volume: typically 1.0 mL, 1.5 mL, 2.0 mL, 4.0 mL, or 5.0 mL
Material: Medical-grade polypropylene
Temperature range: down to -196°C (in vapor phase liquid nitrogen)
Cap type: External or internal thread with O-ring seal
Dimensions: varies by volume; e.g., 2.0 mL vial ~12.5 mm diameter × 48 mm height
Max RCF: up to 17,000 x g (varied by model)
Specifications:
Material: Medical-grade polystyrene
Diameter: 60 mm, 90 mm, 100 mm, or 150 mm
Depth: 15 mm to 20 mm
Lid type: Flat or domed, with or without ventilation ribs
Temperature resistance: up to 60°C
Sterilization method (for sterile versions): Gamma irradiation or ethylene oxide
Specifications:
Material: Borosilicate glass or polypropylene (based on model)
Sizes: 250 mL, 500 mL, 1000 mL, 2000 mL
Chambers: three vertically aligned sections—top (acid), middle (solid reactant), bottom (liquid reservoir)
Valves: glass or plastic stopcocks for gas outlet control
Temperature resistance: up to 180°C (for glass models)
Chemical compatibility: resistant to acids and common laboratory reagents
Specifications:
Material: Polypropylene or PTFE (reusable); autoclavable
Length: ~60 mm to 75 mm
Tip type: Smooth or ribbed (for enhanced grinding)
Compatibility: 1.5 mL or 2.0 mL microcentrifuge tubes
Sterility: Non-sterile or sterile (depending on version)
Temperature resistance: Up to 121°C
©2025-26. All Rights Reserved. Shresha Biortek PVT LTD
