| Sizes | |
| Small | 20mm |
| Medium | 25mm |
| Large | 30mm |
| Extra Large | 35mm |
Specifications:
Volume: typically 6 mL, 7 mL, 10 mL, 20 mL, or 30 mL
Material: Borosilicate glass, polyethylene terephthalate (PET), or polypropylene
Cap type: Screw cap with or without liner (PE, PTFE, or foil-lined)
Height: approx. 55–75 mm (10 mL), 60–95 mm (20 mL)
Diameter: approx. 16 mm (10 mL), 27 mm (20 mL)
Temperature range: -20°C to 80°C (varied by material)
Specifications:
Material: Polypropylene (PP)
Capacity: 25, 81, or 100 cryo vials
Compatibility: 1.0 mL to 5.0 mL cryo vials
Dimensions: 133 mm × 133 mm × 52 mm (for 100-place box)
Grid layout: 5×5, 9×9, or 10×10 configuration
Temperature range: -90°C to 121°C
Specifications:
Material: Borosilicate glass or polypropylene (based on model)
Sizes: 250 mL, 500 mL, 1000 mL, 2000 mL
Chambers: three vertically aligned sections—top (acid), middle (solid reactant), bottom (liquid reservoir)
Valves: glass or plastic stopcocks for gas outlet control
Temperature resistance: up to 180°C (for glass models)
Chemical compatibility: resistant to acids and common laboratory reagents
Specifications:
Material: Polystyrene, polypropylene, or polyethylene
Capacity: 25 mL, 50 mL, 100 mL, or 150 mL
Bottom type: flat, V-bottom, or sloped
Compatibility: suitable for manual or automated liquid handling systems
Temperature resistance: up to 121°C (for polypropylene, autoclavable)
Sterilization method (for sterile versions): gamma irradiation or ethylene oxide
©2025-26. All Rights Reserved. Shresha Biortek PVT LTD
