The Low Pressure Extension Tube has been designed for infusion therapy with low pressure upto 5 bars. The extension tube contains male luer lock connector at one end and female luer connector at other end of the tube.
Specifications:
Volume: typically 6 mL, 7 mL, 10 mL, 20 mL, or 30 mL
Material: Borosilicate glass, polyethylene terephthalate (PET), or polypropylene
Cap type: Screw cap with or without liner (PE, PTFE, or foil-lined)
Height: approx. 55–75 mm (10 mL), 60–95 mm (20 mL)
Diameter: approx. 16 mm (10 mL), 27 mm (20 mL)
Temperature range: -20°C to 80°C (varied by material)
Specifications:
Material: Polystyrene (disposable) or borosilicate glass (reusable)
Diameter: 60 mm, 90 mm, 100 mm, 150 mm
Depth: 15 mm to 25 mm
Lid type: loose-fitting, flat or domed
Temperature range:
– Polystyrene: up to 60°C
– Glass: up to 180°C and autoclavable
Specifications:
Material: Borosilicate glass or polypropylene (based on model)
Sizes: 250 mL, 500 mL, 1000 mL, 2000 mL
Chambers: three vertically aligned sections—top (acid), middle (solid reactant), bottom (liquid reservoir)
Valves: glass or plastic stopcocks for gas outlet control
Temperature resistance: up to 180°C (for glass models)
Chemical compatibility: resistant to acids and common laboratory reagents
Specifications:
Material: Polypropylene or polystyrene
Capacity: 25 mL, 50 mL, 100 mL, or more
Bottom type: V-bottom or sloped
Dimensions: compatible with ANSI/SLAS plate formats (for automation)
Sterilization (for sterile versions): gamma irradiation or ethylene oxide
Temperature resistance: up to 121°C (autoclavable if polypropylene)
Features: may include lid, anti-drip spouts, and non-pyrogenic options
©2025-26. All Rights Reserved. Shresha Biortek PVT LTD
