The I.V. Cannula HE-Can has been designed specially with wings and without an injection port, for special necessities of infusional therapy. 6% luer taper for compatibility with any International product. It ensures pain free & smooth penetration.
| Size | Colour | Water Flow Rate |
| (ml./min.) | ||
| 14G | Orange | 270 |
| 16G | Grey | 180 |
| 17G | White | 125 |
| 18G | Green | 80 |
| 20G | Pink | 54 |
| 22G | Blue | 33 |
| 24G | Yellow | 20 |
Specifications:
Volume: typically 0.5 mL to 50 mL
Material: Polypropylene or polyethylene
Cap type: Screw cap with or without O-ring, snap cap, or plug seal
Temperature range: -80°C to 121°C
Dimensions: varies by volume (e.g., 1.5 mL vial approx. 11 mm diameter × 45 mm height)
Graduation interval: varies, commonly every 0.1 mL or 0.5 mL
Specifications:
Material: Medical-grade polystyrene
Diameter: 60 mm, 90 mm, 100 mm, or 150 mm
Depth: 15 mm to 20 mm
Lid type: Flat or domed, with or without ventilation ribs
Temperature resistance: up to 60°C
Sterilization method (for sterile versions): Gamma irradiation or ethylene oxide
Specifications:
Material: Medical-grade polypropylene or polystyrene
Capacity: 30 mL, 50 mL, 60 mL, or 100 mL
Cap type: Screw cap
Sterility: Sterile or non-sterile (based on version)
Temperature resistance: up to 121°C (autoclavable, if polypropylene)
Leak test: Conforms to standard leakage resistance for sample transport
Specifications:
Material: Polystyrene (disposable), stainless steel or polypropylene (reusable)
Length: approximately 150 mm to 200 mm
Arm width: ~4 mm to 8 mm
Sterility: Sterile (gamma-irradiated or EO) or non-sterile
Autoclavable: Yes (reusable versions)
Tip style: Rounded for minimal agar damage
©2025-26. All Rights Reserved. Shresha Biortek
