| Sizes | |
| Chamber Capacity | 25ml |
| Catheter Size | 10FG |
Specifications:
Volume: typically 0.5 mL to 50 mL
Material: Polypropylene or polyethylene
Cap type: Screw cap with or without O-ring, snap cap, or plug seal
Temperature range: -80°C to 121°C
Dimensions: varies by volume (e.g., 1.5 mL vial approx. 11 mm diameter × 45 mm height)
Graduation interval: varies, commonly every 0.1 mL or 0.5 mL
Specifications:
Material: Polystyrene (disposable) or borosilicate glass (reusable)
Diameter: 60 mm, 90 mm, 100 mm, or 150 mm
Depth: 15 mm to 25 mm
Lid type: Flat or domed, optional ventilation features
Temperature resistance:
– Polystyrene: up to 60°C
– Glass: up to 180°C and autoclavable
Specifications:
Material: Borosilicate glass or polypropylene (based on model)
Sizes: 250 mL, 500 mL, 1000 mL, 2000 mL
Chambers: three vertically aligned sections—top (acid), middle (solid reactant), bottom (liquid reservoir)
Valves: glass or plastic stopcocks for gas outlet control
Temperature resistance: up to 180°C (for glass models)
Chemical compatibility: resistant to acids and common laboratory reagents
Specifications:
Material: Polystyrene, polypropylene, or polyethylene
Capacity: 25 mL, 50 mL, 100 mL, or 150 mL
Bottom type: flat, V-bottom, or sloped
Compatibility: suitable for manual or automated liquid handling systems
Temperature resistance: up to 121°C (for polypropylene, autoclavable)
Sterilization method (for sterile versions): gamma irradiation or ethylene oxide
©2025-26. All Rights Reserved. Shresha Biortek PVT LTD
