Features:
Designed for compatibility with a wide range of manual and electronic multichannel pipettes
Single and multi-channel access from the same reservoir
Sloped or V-shaped bottom minimizes reagent waste
Clear, graduated design for easy volume monitoring
Stackable with minimal sticking for efficient storage
Can include removable inserts to switch between single and divided chamber use
Ideal for high-throughput workflows, ELISA, PCR, and cell culture applications
Available in sterile and non-sterile formats
Specifications:
Material: Polypropylene or polystyrene
Capacity: 25 mL, 50 mL, 100 mL, or more
Bottom type: V-bottom or sloped
Dimensions: compatible with ANSI/SLAS plate formats (for automation)
Sterilization (for sterile versions): gamma irradiation or ethylene oxide
Temperature resistance: up to 121°C (autoclavable if polypropylene)
Features: may include lid, anti-drip spouts, and non-pyrogenic options
Specifications:
Material: Polypropylene or closed-cell polyethylene foam
Tube compatibility: 0.2 mL to 2.0 mL microcentrifuge tubes or cryovials
Capacity: typically 8, 12, 18, or 24 tubes
Dimensions: approx. 80–150 mm width or diameter (varied by model)
Temperature range: -20°C to 100°C
Tube hole diameter: approx. 6–11 mm
Specifications:
Volume: typically 6 mL, 7 mL, 10 mL, 20 mL, or 30 mL
Material: Borosilicate glass, polyethylene terephthalate (PET), or polypropylene
Cap type: Screw cap with or without liner (PE, PTFE, or foil-lined)
Height: approx. 55–75 mm (10 mL), 60–95 mm (20 mL)
Diameter: approx. 16 mm (10 mL), 27 mm (20 mL)
Temperature range: -20°C to 80°C (varied by material)
Specifications:
Volume: typically 1.0 mL, 1.5 mL, 2.0 mL, 4.0 mL, or 5.0 mL
Material: Medical-grade polypropylene
Temperature range: down to -196°C (in vapor phase liquid nitrogen)
Cap type: External or internal thread with O-ring seal
Dimensions: varies by volume; e.g., 2.0 mL vial ~12.5 mm diameter × 48 mm height
Max RCF: up to 17,000 x g (varied by model)
Specifications:
Material: Borosilicate glass or polypropylene (based on model)
Sizes: 250 mL, 500 mL, 1000 mL, 2000 mL
Chambers: three vertically aligned sections—top (acid), middle (solid reactant), bottom (liquid reservoir)
Valves: glass or plastic stopcocks for gas outlet control
Temperature resistance: up to 180°C (for glass models)
Chemical compatibility: resistant to acids and common laboratory reagents
©2025-26. All Rights Reserved. Shresha Biortek PVT LTD
