THERMO SHAKER INCUBATOR

Model	DR-TSI	DR-TSI-T
Display	4.3 inch touch screen (capacitive type)	4.3 inch touch screen (capacitive type)
Temperature control range	RT +5℃~105℃	0℃~105℃
Temperature uniformity	≤0.5℃	≤0.5℃
Timer range	1min~99h59min	1min~99h59min
Temperature control accuracy	±0.5℃(@30-50℃)	±0.5℃(@30-50℃)
Display accuracy	±0.1℃	±0.1℃
Shaking speed	200-3000rpm	200~3000rpm
Heating time (25-100℃)	≤15min (RT 20℃～30℃)	≤15min (RT 20℃～30℃)
Refrigeration time(detected at 25℃ ambient temperature)	—	≤20min (Ambient temperature ≤20℃: 20℃～0℃) ≤20min(Ambient temperature ≤25℃:RT～4°C) ≤20min (Ambient temperature ≤30℃:RT～10℃
Heating rate gear	Max; 3℃/min; 2°C/min;1℃/min; 0.1℃/min	Max; 3℃/min; 2°C/min;1℃/min; 0.1℃/min
Cooling rate gear	—	Max;1℃/min;0.5℃/min;0.1℃/min
Program number	50	50
External port	USB: program related, printer; 7Pin socket: thermo lid	USB: program related, printer; 7Pin socket: thermo lid
Shaking amplitude	3mm	3mm
Dimension(mm)	318x154x220	318×154×220
Blocks	0.5ml tubes, 2ml tubes & 96 well PCR Plate Optional: 0.2 1.5, 5, 15, 50 ml tubes, 384 well plates
Weight	10kg	10kg

Temperature range	-10° C to -40°C
Temperature accuracy	±0.5°C
Temperature Uniformity	±0.1°C
Temperature controller	Dual display PID controller
Temperature sensor	PT100
Inner chamber	SS 304
External cabinet	Powder coated GI sheet
Insulation	Glass wool
Door	Insulated door Mechanical latch / clamp
Heaters	Resistance wire heaters
Shelves	SS wire mesh (removable)
Standard fittings	Mains on/off switch Load Indicator Fan on/off switch
Power supply	220 Volts 50Hz
Optional	GMP construction (Inner & outer SS304) PLC + HMI controller w/ USB interface 21 CFR Part 11software Data logger w/ USB interface Thermal printer Inner chamber LED light

Temperature range	5°C to 60°C
Temperature controller	Digital PID controller
Temperature accuracy	±1%
Temperature sensor	PT-100
Humidity range	50% to 90% RH
Humidity controller	Digital PID controller
Humidity accuracy	±3%
Light	150-170 micromole/m2/sec
Light timer	24×7 weekly digital timer
Construction	Double walled
Exterior	Mild steel powder coated
Interior	Stainless steel 304
Outer door	Single or double solid doors with lock & key
Inner door	Glass door to view samples
Shelves	3 to 12 (Height adjustable)
Safety	Audio / visual alarm for temperature deviation
Optional	Exterior made of stainless steel 304 / 316 PLC with HMI interface Data logger with USB interface Password protection for controller Caster wheels
Power supply	220 Volts / 50 Hz

Shaker Speed (20 – 250 RPM) (350,400 & 500 OPTIONAL)
Orbit Diameter	ø 25 mm
Accuracy	± 2% of maximum speed
Temperature range	5˚C above RT to 60˚C & with cooling 5°C-60°C (Customize temperature options available)
Resolution	0.1°C
Temp. accuracy	± 0.3˚C
Power supply	230V ± 10%, 50Hz

Item Name	CO2 Incubator
Model No.	DR-CO2-80UV	DR-CO2-80	DR-CO2-80+	DR-CO2-180UV	DR-CO2-180	DR-CO2-180+
Sterilization	UV	140°C	180°C	UV	140°C	180°C
Volume	80L	80L	80L	180L	180L	180L
Microprocessor-based controller	Proprietary algorithm to control CO2 and temperature
Display	LCD touch display
Temp control range	Ambient +5°C- 60°C
Temp stability	±0.1°C
Temp field uniformity	±0.3°C (at 37°C )
Timer function	0 – 999hr 59 min.
CO2 measurement principle	Infrared (IR) detection
CO2 control range	0-20%
CO2 display resolution	0.10%
CO2 supply	0.05~0.1MPa is recommended
Relative Humidity	Ambient humidity ~95% at 37°C
HEPA filtration	HEPA filters at the gas inlet, ISO 5 level, 5 minutes
Temperature recovery time	≤10 min (open door 30sec room temperature 25°C set value 37°C)
O2 concentration recovery time	≤5 min (open the door 30sec set value 5%)
MOC	The inner chamber is made up of stainless steel and outer chamber with MS with powder coating
Light	Florescent light
Historical data storage	250,000 messages
Data export interface	USB interface
Scalability	Up to 2 units can be stacked.
Working environment temperature	18~30°C
Power supply	230V±10%, 50~60Hz
Inner Dimensions (L x D x H) mm	450x450x450			550x600x600
Outer Dimensions (L x D x H) mm	650x650x750			750x800x850

Useful Links