₹1,529,000.00 Original price was: ₹1,529,000.00.₹1,390,000.00Current price is: ₹1,390,000.00.
TOC Analyzer – L1:TOC-6500
Caption: Online Total Organic Carbon (TOC) Analyzer – Features and Technical Specifications
Description: The L1:TOC-6500 is an online and offline Total Organic Carbon (TOC) analyzer designed for real-time monitoring and measurement of microelectronics water, purified water, water for injection, and other high-purity water applications. It uses conductivity detection and UV oxidation for TOC quantification, with automatic sample introduction, a 7-inch touchscreen, large data storage, USB data transfer, and modular construction for easy installation and maintenance.
Technical Specifications
| Parameter | Specification |
| Detection Range | 0.001–1.5 mg/L |
| Detection Limit | 1 ppb |
| Max Tolerance | ±5% |
| Analysis Time | 3 min |
| Response Time | Within 10 min |
| Sample Temperature | 1–95°C |
| Environment Temperature | 10–40°C with temperature change ±5°C/d |
| Sample Flow Speed | 3 mL/min |
| Relative Humidity | <85% |
| Repeatability Tolerance | <3% |
| Drifting | ±5% |
| Power Supply | AC 220V, 50/60Hz or AC 110V, 50/60Hz |
| Frequency | 50/60Hz |
| Rated Power | 100W |
| Dimension | 440 × 220 × 300 mm |
Features
Conductivity detector for quantification of TOC concentration.
L1:TOC-6500 supports online mode for real-time monitoring.
Suitable for microelectronics water, purified water, water for injection, and similar applications.
Automatic sample introduction with one-button setting, reducing sample contamination and operator exposure.
UV oxidation using a UV lamp without the need for added acid, gas, or catalyst.
7-inch touchscreen with smart user interface for easy operation and data viewing.
FDA-21 CFR Part-11 available as an optional feature.
Optional auto sampler according to experimental requirements.
Online and offline modes can be switched easily.
8GB storage capacity for test data.
Data can be retrieved and saved directly to USB.
Modular design for quick installation and easy maintenance.
Available on order.
| Chamber design | Round and Rectangular |
|---|---|
| Vacuum range | Up to -760 mmHg |
| Temperature range | Ambient+5°C to 150°C (Optional 200ºC) |
| Temperature sensor | PT100 |
| Temperature controller | Digital PID controller Display of SV & PV |
| Inner chamber | Hermetically welded stainless steel 304 sheet |
| External cabinet | Powder coated GI sheet |
| Door | Solid door with clamp & toughened glass window |
| Gasket | High temperature silicon gasket |
| Shelves | Removable SS shelves |
| Vacuum fittings | Vacuum valve / exhaust valves (Rubber hose) |
| Standard fittings | Mains on/off switch Vacuum pump on/off switch Electric socket for vacuum pump |
| Power supply | 220 Volts 50Hz |
| Optional | KF25 flange vacuum connection 21 CFR compliance software Temperature up to 250°C All SS 304 construction (GMP) Digital vacuum control through solenoid valves PLC + HMI controller with USB interface Diaphragm valves for inert gas Timer 99 hours 59 min Oil-free vacuum pump |
| Air flow direction | Vertical and Horizontal |
|---|---|
| Air cleanliness | Class 100 |
| Construction | SS / Powder coated MS / GI sheet/ wooden with 18 gauge ss. |
| Sash (front door) | Manual/ Motorized sliding type (Acrylic transparent and tiffin glass) |
| Side panels | Acrylic /polycarbonate / SS |
| Air velocity | 0.4 m/s to 0.6 m/s/ 0.45m/sec |
| Illumination | Fluorescent or LED light/ UV light (800lux, glare-free) |
| Noise level | 65 ±5 dB |
| Power supply | 220 volts / 50 Hz |
| Air filtration |
|
| Air filtration |
|
| Optional |
|
| NNER CHAMBER | SS 304 / 316/FRP COATING/PHENOLIC RESIN |
|---|---|
| EXTERIOR | Powder coated MS / Stainless Steel /GI |
| WORK TOP | SS 304 /Jet black granite |
| ILLUMINATION | Fluorescent tube light |
| BLOWER | Centrifugal exhaust blower (direct drive motor) |
| STANDARD FITTINGS | Water tap, sink with drainage system, electrical sockets and Canopy ventilation |
| OPTIONAL | FRP coating on inner walls Air foil Scrubber system Storage cabinet Caster wheels with brake Wet & dry service valves Certification (ASHRAE110- 1995 / EN-14175- 2003) Air Temperature indicator Flow Monitor IQ/OQ/PQ |
| Model | Dimensions | |
|---|---|---|
| DR-FH-222 | 2 x 2 x 2 ft | 610 x 610 x 610 mm |
| DR-FH-322 | 3 x 2 x 2 ft | 914 x 610 x 610 mm |
| DR-FH-422 | 4 x 2 x 2 ft | 1219 x 610 x 610 mm |
| DR-FH-522 | 5 x 2 x 2 ft | 1524 x 610 x 610 mm |
| DR-FH-622 | 6 x 2 x 2 ft | 1829 x 610 x 610 mm |
| Temperature range | 5°C to 60°C |
|---|---|
| Temperature accuracy | ±0.2°C @37°C |
| Temperature controller | Dual display PID controller Display SV & PV Auto tuning feature |
| Temperature sensor | PT100 |
| Inner chamber | SS 304 |
| External cabinet | Powder coated GI sheet |
| Insulation | Glass wool |
| Door | Insulated door Mechanical latch/clamp Glass window |
| Heaters | Resistance wire heaters |
| Shelves | SS wire mesh (removable) |
| Air circulation | Motorized blower / Axial fan |
| Standard fittings | Mains on/off switch Load Indicator Fan on/off switch |
| Power supply | 220 Volts 50Hz |
| Optional | – Calibration certificate – Data logger w/ USB – Interface thermal printer. – Inner chamber LED light. |
©2025-26. All Rights Reserved. Shresha Biortek PVT LTD
Welcome Back 👋
Sign in to access your account and continue where you left off.
Welcome aboard 🚀
Create your account to access everything you need.
Added to cart
Check out our shop to see what's available
