Automatic Seed Counter

Sale!

Product Code: DR-SC5

Categories: ANALYTICAL INSTRUMENTS, LABORATORY EQUIPMENTS

Original price was: ₹92,950.00.Current price is: ₹84,500.00.

PARTICLE / SEED COUNTER

Specifications

Features

• Two modes: Free Count and Bulk Count.

• Adjustable counting speed: Counting speed can be adjusted according to the application.

• High accuracy: Different sensitivity levels support counting of various particle sizes.

• Automatic deceleration: Counting speed automatically slows down when the count approaches the preset value.

• Automatic motor protection: The motor stops automatically if no particles are detected on the plate for 60 seconds.

• User-friendly interface: LCD screen clearly displays mode selection, counting time, sensitivity level, and particle count.

• Wide application range: Suitable for counting crop seeds, vegetable seeds, feed pellets, diamonds, tablets, and similar particles.

Warranty: 1 Year | GST Extra

Related products

Item Name	CO2 Incubator
Model No.	DR-CO2-80UV	DR-CO2-80	DR-CO2-80+	DR-CO2-180UV	DR-CO2-180	DR-CO2-180+
Sterilization	UV	140°C	180°C	UV	140°C	180°C
Volume	80L	80L	80L	180L	180L	180L
Microprocessor-based controller	Proprietary algorithm to control CO2 and temperature
Display	LCD touch display
Temp control range	Ambient +5°C- 60°C
Temp stability	±0.1°C
Temp field uniformity	±0.3°C (at 37°C )
Timer function	0 – 999hr 59 min.
CO2 measurement principle	Infrared (IR) detection
CO2 control range	0-20%
CO2 display resolution	0.10%
CO2 supply	0.05~0.1MPa is recommended
Relative Humidity	Ambient humidity ~95% at 37°C
HEPA filtration	HEPA filters at the gas inlet, ISO 5 level, 5 minutes
Temperature recovery time	≤10 min (open door 30sec room temperature 25°C set value 37°C)
O2 concentration recovery time	≤5 min (open the door 30sec set value 5%)
MOC	The inner chamber is made up of stainless steel and outer chamber with MS with powder coating
Light	Florescent light
Historical data storage	250,000 messages
Data export interface	USB interface
Scalability	Up to 2 units can be stacked.
Working environment temperature	18~30°C
Power supply	230V±10%, 50~60Hz
Inner Dimensions (L x D x H) mm	450x450x450			550x600x600
Outer Dimensions (L x D x H) mm	650x650x750			750x800x850

Construction	Economy Model	Double Walled Model	Triple Walled Model
MOC Exterior	Painted MS sheet	SS 304 (mirror finish)	SS 304 (mirror finish)
No. of walls	Two	Two	Three
Lid	Polished MS	SS 304	SS 304
Interior	SS 304 with silicon gasket
Working Pressure	15-30 psi
Working Temp.	121°C to 134°C
Controller	Auto set to 15psi & 121°C
Pressure display	Analogue dial gauge
Timer	Mechanical timer
Programmable	Programmable automatic start timer
Hydraulic tested	Hydraulically Tested up to 40 psi (ASME Guideline)
Lick lock	Single hand easy lock system for operating and closing
	Program for heating sterilization, exhaust, warming and completion.
Basket	Stainless steel basket	Stainless steel basket	Not Required
Power supply	220 Volts 50Hz
Standard Fittings	Low water indicator; Automatic pressure switch; Pedal lifting device Steam release valve; Water outlet valve; Spring loaded safety valve Power cable with three pin tops
Optional Accessories	Fully stainless steel construction (GMP) Up to 134°C temperature range PID temperature controller cum timer with alarm (buzzer) PLC with HMI interface with data logging 21 CFR Part 11 software Thermal Printer Lower water cut-off

NNER CHAMBER	SS 304 / 316/FRP COATING/PHENOLIC RESIN
EXTERIOR	Powder coated MS / Stainless Steel /GI
WORK TOP	SS 304 /Jet black granite
ILLUMINATION	Fluorescent tube light
BLOWER	Centrifugal exhaust blower (direct drive motor)
STANDARD FITTINGS	Water tap, sink with drainage system, electrical sockets and Canopy ventilation
OPTIONAL	FRP coating on inner walls Air foil Scrubber system Storage cabinet Caster wheels with brake Wet & dry service valves Certification (ASHRAE110- 1995 / EN-14175- 2003) Air Temperature indicator Flow Monitor IQ/OQ/PQ

Category	DR-B2
External Size (WDH)	13837752250 mm
Internal Size (WDH)	1210600660 mm
Tested Opening	Safety height 10″
Max Opening	470 mm
Airflow Volume (Exhaust)	100%: 1320 m³/h (776 cfm)
Front Window	Motorized;Two-layer laminated toughened glass ≤6mm, Anti-UV
Filter	ULPA,99.9995% efficiency at 0.12μm (02), filter life indicator
Filter Guard Type	Aluminum alloy frame
Noise	NSF 49 ≤60 dB
Illumination	≥1000 Lux
Socket	2, Total consumption ≤500W
Display	Touch screen
Tap	Water tap1, Gas tap1
Power Supply	AC220V,50/ 60Hz
Consumption	400W
Alarm	Abnormal airflow velocity; Filter replacement; Front window at unsafe height
Blower	One ECM motor, 230V AC; Speed adjustable, high efficiency and low power consumption
Material	Working area: 304 stainless steel Frame,Decorative Plate: cold-rolled steel with anti- bacteria powder coating
UV Lamp	30W
Germicidal UV Lamp	Emission of 253.7 nanometers for most efficient decontamination
Certification	NSF 49
Illuminating Lamp	LED lamp, 20W*2
Standard Accessory	LED lamp2, UV lamp2, Base stand, SS water tap1, Gas tap1, Drain valve, Waterproof socket*2
Optional Accessory	Armrest, Airflow tester, Formalin fumigation sterilizer, Infrared sterilizer, exhaust duct
Package Size (WDH)	154010801900 mm
Gross Weight	340 kg

+91 82480 87694

info@shreshabiotek.com

@shreshabiotek