Key Features
• Compact and user-friendly fully automatic water distillation equipment.
• Manufactured from 3.3 expansion borosilicate glass or quartz glass.
• Replaceable silica-sheathed quartz heater with screw-threaded connectors for easy cleaning.
• Distillate temperature approximately 25° to 45°C, supported by an efficient condenser.
• Powder-coated stand for rust-free operation and lustrous appearance.
• Cooling water from the condenser is re-circulated into the boiling chamber to save energy.
• Screw-threaded connectors for easy plumbing and installation and to avoid glassware breakage during assembly.
• Fuse protection for safety during voltage fluctuation or short circuit.
• Replaceable constant-level device for easy draining and cleaning of the boiling chamber.
• Removable front cover for easy access to glass parts.
• Electrical power: 220/240 V, 50/60 Hz, single-phase supply.
Technical Specifications
| Parameter |
Specification |
| Model No. |
IDO-4D |
| Stage |
Double Stage |
| Output Capacity (approx.) |
4 litres/hour |
| Distillate Quality |
Pyrogen Free |
| Conductivity |
0.8–1.0 µS/cm |
| Cooling Water Requirement (approx.) |
2–4 litre/min |
| Power Rating (Total) |
6.0 kW |
| Electrical Supply |
220–240 V, 50/60 Hz, Single Phase |
Additional Built-in Safety Features
• Gate Valve: Conserves cooling-water wastage in case of power failure.
• Flow Switch: Shuts off the equipment in case of cooling-water failure.
• Temperature Switch: Shuts off the unit if the boiler water level falls below the heater, helping protect the glass parts from damage.
• Level Sensor: Shuts off the distillation equipment if the water level in the boiler falls below the heater.
• Reservoir Level Sensor: Automatically switches the equipment ON/OFF depending on reservoir water level, helping save energy. Additional reservoirs can be supplied at extra cost.
Category
Laboratory Equipment → Water Distillation Unit
