Microcontroller Flame Photometer (4 Filter)

Sale!

Product Code: DR-LI-1384

Categories: ANALYTICAL INSTRUMENTS, LABORATORY EQUIPMENTS

Original price was: ₹107,250.00.Current price is: ₹97,500.00.

Technical Specifications

Parameter	Specification
Model	LI-1384
Filters	4 filters: Na (Sodium), K (Potassium), Ca (Calcium), Li (Lithium) with compressor
General Range	Na: 0–100 ppm; K: 0–100 ppm; Ca: 0–100 ppm; Li: 0–100 ppm; Ba: 30–300 ppm
Serum Range	Na: 0–200 meq/l, 1:100 dilution; K: 0–10 meq/l, 1:100 dilution; Ca: 0–10 meq/l, 1:2 dilution; Li: 0–2 meq/l, 1:5 dilution
Urine Range	Na: 0–250 meq/l, 1:100 dilution; K: 0–100 meq/l, 1:100 dilution
Sensitivity – General Mode	Na: 0.5 ppm; K: 0.5 ppm; Li: 0.5 ppm; Ca: 15 ppm; Ba: 30 ppm
Filters	Na & K supplied; Ca, Li & Ba optional at extra cost; factory fitted only
Resolution	0.1 ppm / 0.1 meq
Reproducibility	< 1% coefficient of variation for 20 consecutive samples using 10 ppm Na set as Maximum Standard; up to 3% CV for 20 consecutive Ba samples between 50 to 199 ppm
Linearity	< 2% error when 3 ppm Na/K and 5 ppm Li are set as Maximum Standard
Curve-Fit Accuracy	± 2%
Display	128 × 64 graphical LCD
Average Time	In-built in software
Flame System	LPG & dry oil-free air
Detector	Photodiode
Calibration	Up to 25 user-selectable standards with curve-fitting software; 5 for each element; multiple calibration curves can be stored in memory
Aspiration Time	3 ml per minute
Gas Control	Adjustable with knob
Flame Failure	Auto detection
Gas Cutoff	Automatic
Ignition System	Auto ignition
Atomiser	Axial flow type
Dimensions	Instrument: 365 × 245 × 220 mm approx. (L × B × H)
PC Interface	USB; Main Unit: 8 kg approx.
Power Supply	230 V AC ±10%, 50 Hz

Related products

Construction	Economy Model	Double Walled Model	Triple Walled Model
MOC Exterior	Painted MS sheet	SS 304 (mirror finish)	SS 304 (mirror finish)
No. of walls	Two	Two	Three
Lid	Polished MS	SS 304	SS 304
Interior	SS 304 with silicon gasket
Working Pressure	15-30 psi
Working Temp.	121°C to 134°C
Controller	Auto set to 15psi & 121°C
Pressure display	Analogue dial gauge
Timer	Mechanical timer
Programmable	Programmable automatic start timer
Hydraulic tested	Hydraulically Tested up to 40 psi (ASME Guideline)
Lick lock	Single hand easy lock system for operating and closing
	Program for heating sterilization, exhaust, warming and completion.
Basket	Stainless steel basket	Stainless steel basket	Not Required
Power supply	220 Volts 50Hz
Standard Fittings	Low water indicator; Automatic pressure switch; Pedal lifting device Steam release valve; Water outlet valve; Spring loaded safety valve Power cable with three pin tops
Optional Accessories	Fully stainless steel construction (GMP) Up to 134°C temperature range PID temperature controller cum timer with alarm (buzzer) PLC with HMI interface with data logging 21 CFR Part 11 software Thermal Printer Lower water cut-off