FEATURES:
1. 7 inch touch screen with simple interface. No computer required 3. Only require 0.5-2ul sample to perform accurate measurements.
2. Android operating system with free software update
3. Only require 0.5-2ul sample to perform accurate measurements.
4. Long life’s Xenon flash lamp for up to 10 years
5. Flexible data output. The data can be printed with built-in printer, and output via USB memory stick
6. OD600 measurement, ideal for bacterial concentration measurement
7. Direct micro-volume measurement with 0.5-2ul of sample. Eliminates the need for expensive accessories. 8. Wide range of wavelength (190-850nm)
9. Turn on and instantly measure without lamp warm up time; Full scan capability from 200-800nm with 6 sec. 10. Switch off automatically when the machine is idle for more than 5mins, and awake by touching the screen.
| Model | DR-SP-350 | Absorbance accuracy |
±1% (7.332Abs at 260nm) |
|
| 4 Light Source | 0.02mm 0.05mm 0.2mm 1.0mm | Spectral resolution | <1nm | |
| Photometric accuracy | ±0.005A or ±1% | |||
| Detectors | HAMAMATSU UV Enhanced CMOS Line Array Sensing | Wavelength accuracy | ±1nm within | |
| Nucleic acid/ protein assay range | 0-27,500 ng/µl dsDNA
0.06-820 mg/mL BSA |
Wavelength Reproducibility | <±0.2nm | |
| Sample wavelength scanning | 190-850nm | |||
| Fluorescence sensitivity | DsDNA: 0.5pg/ul | Base measurement only | 0.5~2ul | |
| Fluorescence linearity | ≤1.5% | Sample base material | Quartz fiber and stainless steel | |
| Wavelength range | (190nm-850nm) | Testing time | <5S | |
| Sample volume requirements | 0.5-2ul | Power consumption at standby | 5W | |
| OD600 absorbance range | 0-6.000Abs | Data output method | USB | |
| OD600Absorbance stability | [0,3)≤0.5%,[3,4)<2% | Light source | Xenon flashing light | |
| OD600Absorbance accuracy | [0,2)≤0.005A,[2,3)≤1%,[3,4)≤2% | Power adapter | 24V DC | |
| Od600 Repeatability of absorbance |
[0,3)≤0.5%, [3,4)<2% |
Power consumption |
25W |
|
| Absorbance range | 0.02-300A (Equivalent to 10mm) | Dimension | W200mm×D260mm×H165mm | |
| Absorbance | 0.002Abs (0.2mm optical range) | Weight | 5Kg | |
| Item Name | CO2 Incubator | |||||
| Model No. | DR-CO2-80UV | DR-CO2-80 | DR-CO2-80+ | DR-CO2-180UV | DR-CO2-180 | DR-CO2-180+ |
| Sterilization | UV | 140°C | 180°C | UV | 140°C | 180°C |
| Volume | 80L | 80L | 80L | 180L | 180L | 180L |
| Microprocessor-based controller | Proprietary algorithm to control CO2 and temperature | |||||
| Display | LCD touch display | |||||
| Temp control range | Ambient +5°C- 60°C | |||||
| Temp stability | ±0.1°C | |||||
| Temp field uniformity | ±0.3°C (at 37°C ) | |||||
| Timer function | 0 – 999hr 59 min. | |||||
| CO2 measurement principle | Infrared (IR) detection | |||||
| CO2 control range | 0-20% | |||||
| CO2 display resolution | 0.10% | |||||
| CO2 supply | 0.05~0.1MPa is recommended | |||||
| Relative Humidity | Ambient humidity ~95% at 37°C | |||||
| HEPA filtration | HEPA filters at the gas inlet, ISO 5 level, 5 minutes | |||||
| Temperature recovery time | ≤10 min (open door 30sec room temperature 25°C set value 37°C) | |||||
| O2 concentration recovery time | ≤5 min (open the door 30sec set value 5%) | |||||
| MOC | The inner chamber is made up of stainless steel and outer chamber with MS with powder coating | |||||
| Light | Florescent light | |||||
| Historical data storage | 250,000 messages | |||||
| Data export interface | USB interface | |||||
| Scalability | Up to 2 units can be stacked. | |||||
| Working environment temperature | 18~30°C | |||||
| Power supply | 230V±10%, 50~60Hz | |||||
| Inner Dimensions (L x D x H) mm | 450x450x450 | 550x600x600 | ||||
| Outer Dimensions (L x D x H) mm | 650x650x750 | 750x800x850 | ||||
| Construction | Economy Model | Double Walled Model | Triple Walled Model |
|---|---|---|---|
| MOC Exterior | Painted MS sheet | SS 304 (mirror finish) | SS 304 (mirror finish) |
| No. of walls | Two | Two | Three |
| Lid | Polished MS | SS 304 | SS 304 |
| Interior | SS 304 with silicon gasket | ||
| Working Pressure | 15-30 psi | ||
| Working Temp. | 121°C to 134°C | ||
| Controller | Auto set to 15psi & 121°C | ||
| Pressure display | Analogue dial gauge | ||
| Timer | Mechanical timer | ||
| Programmable | Programmable automatic start timer | ||
| Hydraulic tested | Hydraulically Tested up to 40 psi (ASME Guideline) | ||
| Lick lock | Single hand easy lock system for operating and closing | ||
| Program for heating sterilization, exhaust, warming and completion. | |||
| Basket | Stainless steel basket | Stainless steel basket | Not Required |
| Power supply | 220 Volts 50Hz | ||
| Standard Fittings | Low water indicator; Automatic pressure switch; Pedal lifting device Steam release valve; Water outlet valve; Spring loaded safety valve Power cable with three pin tops | ||
| Optional Accessories |
|
||
| Model | DR-RCB-6 | DR-RCB-12 |
|---|---|---|
| Make | DR Labs | DR Labs |
| Temp. Control Range | -20°C ~ 100°C | -20°C ~ 100°C |
| Temp. Resolution | 0.01°C | 0.01°C |
| Temp. Accuracy | ±0.05°C | ±0.05°C |
| Temp. Control | Microprocessor PID | Microprocessor PID |
| Display | LCD | LCD |
| Refrigeration Model | Air cooled refrigeration through compressor | Air cooled refrigeration through compressor |
| Refrigerant | R134A | R134A |
| Pump Circulation | Internal & External | Internal & External |
| Temp. Sensor | PT-100 | PT-100 |
| Pump Flow Rate | 6L/min | 6L/min |
| Tank Capacity | 6L | 12 L |
| Tank Size | 250 x 200 x 150 mm | 300 x 250 x 200 mm |
| Bath Opening | 180 x 140 mm | 235 x 160 mm |
| Bath Depth | 150 mm | 200 mm |
| Power Supply | AC 220 V / 50 Hz | AC 220 V / 50 Hz |
| Dimensions | 320 x 370 x 655 mm | 320 x 370 x 765 mm |
| Packing Dimensions & Weight | 530 x 450 x 800 mm & 44 kgs | 530 x 450 x 900 mm & 50 kgs |
| Chamber design | Round and Rectangular |
|---|---|
| Vacuum range | Up to -760 mmHg |
| Temperature range | Ambient+5°C to 150°C (Optional 200ºC) |
| Temperature sensor | PT100 |
| Temperature controller | Digital PID controller Display of SV & PV |
| Inner chamber | Hermetically welded stainless steel 304 sheet |
| External cabinet | Powder coated GI sheet |
| Door | Solid door with clamp & toughened glass window |
| Gasket | High temperature silicon gasket |
| Shelves | Removable SS shelves |
| Vacuum fittings | Vacuum valve / exhaust valves (Rubber hose) |
| Standard fittings | Mains on/off switch Vacuum pump on/off switch Electric socket for vacuum pump |
| Power supply | 220 Volts 50Hz |
| Optional | KF25 flange vacuum connection 21 CFR compliance software Temperature up to 250°C All SS 304 construction (GMP) Digital vacuum control through solenoid valves PLC + HMI controller with USB interface Diaphragm valves for inert gas Timer 99 hours 59 min Oil-free vacuum pump |
Welcome Back 👋
Sign in to access your account and continue where you left off.
Welcome aboard 🚀
Create your account to access everything you need.
Added to cart
Check out our shop to see what's available
