Design: Curved
Length: 25.5 cm
Material: Stainless Steel
Grip: Finger ring handles with ratchet lock mechanism
Jaw Type: toothed or serrated (depending on variant)
Sterilization: Fully autoclavable
Finish: Satin or mirror polished
Use: Gynecological surgical instrument for grasping uterine or cervical tissue
Specifications:
Material: Non-woven polypropylene (3-ply or 4-ply)
BFE: ≥ 98% (Type II or Type IIR)
Fluid resistance: Present in Type IIR masks (splash resistant)
Type classification: Type I, II, IIR
Size: Approx. 175 mm × 95 mm (standard adult size)
Sterility: non-sterile or sterile options available
1-channel ECG acquisition
12-lead ECG recording with lead switching
Built-in thermal printer for real-time ECG output
Prints on 50mm wide paper
Operates on AC power with internal battery backup
Simple display and keypad for essential control
Measurement of basic ECG parameters (heart rate, intervals)
Basic filtering system for noise reduction
Limited internal memory for recent ECG recordings
Compact form factor designed for handheld use
Patient safety protections including input isolation
Complies with standard medical equipment regulations
3-channel simultaneous ECG acquisition
12-lead ECG recording
Integrated thermal printer for ECG report generation
Prints on 80mm wide paper
Built-in rechargeable battery with AC power operation
LCD display with functional navigation keys
Standard measurements: heart rate, PR/QRS/QT intervals, axes
Noise filters: baseline, muscle, AC interference
USB or SD card support for data export (model dependent)
Complies with medical safety and electromagnetic standards
Patient isolation and overvoltage protection included
Memory for limited number of ECG records
Specifications
12-channel electrocardiograph system
8-inch high-resolution color touchscreen display
Alphanumeric keyboard for data input
Internal memory capacity for storing up to 800 ECG records
USB flash drive support for storage expansion and data export
Built-in thermal printer supporting standard thermal and A4 fax paper
USB connectivity for external printer support
Data communication via LAN and optional internal Wi-Fi
Export formats supported: PDF, SCP, FDA-XML, DICOM
Supports standard communication protocols: DICOM Worklist, HL7, GDT
24-bit analog-to-digital conversion for precise signal detection
Common-mode rejection ratio (CMRR) greater than 140dB
Real-time ECG waveform freezing and review up to 120 seconds
Automatic measurement and interpretation validated with CSE, AHA, and MIT databases
Built-in Glasgow interpretation algorithm
Optional vector ECG analysis feature
Compatible with optional SE-1515 data management software and Smart ECG Viewer
Rolling stand or trolley configuration available
Basic model variant offered for simplified applications
Material: Commercially pure titanium or titanium alloy (e.g., Ti–6Al–4V ELI).
Plate Thickness: 2.5 mm.
Hole Configurations: Options include 8, 10, 12, 14, 16, 18, and 20 holes.
Plate Lengths: Vary based on the number of holes, e.g., 8 holes – 69 mm, 10 holes – 86 mm, up to 20 holes – 171 mm.
Screw Compatibility: Designed for 2.5 mm diameter screws.
Sterilization: Autoclavable.
Compliance: CE and ISO certified.
Left and Right Versions: To match patient anatomy.
Specifications
Length: Typically ranges from 9.75 inches (24.7 cm) to 13.5 inches (34 cm)
Material: Stainless steel for reusable models; medical-grade plastic for disposable models
Tip Diameter: Commonly around 3 mm
Sterility: Sterile
Usage: Single-use for disposable models; reusable for stainless steel models
Packaging: Individually packaged for sterility
Compliance: Meets medical standards for gynecological instruments
Specifications:
Material: Surgical-grade stainless steel
Finish: Satin or matt to prevent reflections
Sterilization: Autoclavable up to 134°C
Sizes:
Virgin: 65mm x 16mm
Small: 75mm x 25mm
Medium: 90mm x 33mm
Large: 95mm x 35mm
X-Large: 115mm x 35mm
Blade Configuration: Angled, duckbill shape
Locking Mechanism: Side screw or center screw
Surface: Smooth, non-reflective
Packaging: Individually packed, non-sterile
Reusability: Yes
Weight: Approximately 0.15 kg (varies by size)
Specifications
Material: Stainless steel or medical-grade plastic
Length: 4.5 to 6 inches (11 to 15 cm)
Weight: Approx. 30–100 grams
Sterilization method: Autoclavable or pre-sterilized (EO gas or gamma radiation)
Usage type: Single-use or reusable
Jaw tip shape: Angled or curved tip design
Operating mechanism: Spring-loaded or manual
Packaging: Individually wrapped (sterile), bulk options available for non-sterile
Color: silver (metal) or white/blue (plastic)
Shelf life: Approx. 3–5 years
Compatibility: Universal fit for standard skin staples
Specifications:
Stainless steel thickness: 1.5–2 mm
Dimensions: approx. 2400 L x 800 W x 1750 H mm
Ventilation system with centrifugal electro-fan motors
Adjustable suction speed, max capacity 1404 m³/h
Aluminium axis filters with potassium permanganate for formaldehyde
Touch screen control for ventilation and filter monitoring
Filter life control with notification at 800 hrs
Visual alarms and ON/OFF lighting controls
Displays splash shield control, ventilation speed %, filter hours
Water-tight safety covers on switches
Electrical supply: 220V ±20V, 50Hz
Formalin tank storage with ventilated lower enclosure
Height adjustable work area with 350 mm range
Supplied with 2 perforated removable trays (handling holes at corners)
Type: Curved (various curvatures available)
Material: Surgical stainless steel
Point Types: Cutting, tapered, or blunt depending on use
Use: Tissue approximation, wound closure in deep or confined areas
Compatibility: Fits standard needle holders and suture threads
Sterilization: Supplied sterile for single use or sterilizable for reuse
Sizes: Available in multiple sizes, ranging from 6 to 20 mm in length depending on surgical application
Durability: High tensile strength and corrosion resistance for safe, repeated use if reusable
Type: Straight
Size: 10 (needle length and thickness as per standardized sizing)
Material: Surgical stainless steel
Point Type: Sharp, ground for smooth penetration
Use: Wound closure, tissue approximation, general surgical suturing
Compatibility: Fits standard needle holders and various suture threads
Sterilization: Typically sterilized and packaged for single use; reusable versions require sterilization before reuse
Durability: High tensile strength and corrosion resistance for safe surgical use
Blade Type: Straight
Length: 140 mm (14 cm)
Material: Surgical grade stainless steel
Handle Type: Finger ring handles
Joint Type: Box lock or rivet hinge for smooth action
Blade Edge: Sharp cutting edges suitable for tissue and suture cutting
Finish: Mirror polished or satin matte finish
Sterilization: Fully autoclavable, compatible with chemical sterilants
Application: General surgical procedures, wound dressing, and suture cutting
Durability: High resistance to corrosion, dulling, and mechanical damage
Capacity: 0.945 liters (approximately 945 ml)
Material: Surgical grade stainless steel
Construction: Seamless, one-piece drum with matching cover
Dimensions: Typically compact, exact dimensions vary by manufacturer but designed for easy handling
Finish: Mirror-polished or satin finish for easy cleaning and professional appearance
Sterilization: Fully autoclavable and compatible with chemical sterilants
Usage: Storage of sterile dressings, cotton, gauze, and small surgical supplies
Durability: Resistant to corrosion, rust, and physical damage during routine use
Portability: Lightweight and easy to transport within healthcare settings
Length: 34 cm (13 inches)
Material: Silver-plated metal
Design: Slightly curved with rounded tip
Markings: Graduated scale (in cm and/or inches) for depth measurement
Tip Type: Blunt, rounded for safe and comfortable insertion
Finish: Smooth silver-plated surface
Sterilization: Fully autoclavable and compatible with chemical disinfectants
Use: To determine uterine length and direction prior to gynecological procedures
Reusability: High – maintains accuracy and finish after repeated use
Capacity: 825 ml
Material: Surgical grade stainless steel
Construction: One-piece, seamless
Edge Design: Rounded, smooth edges for safety
Finish: Mirror polish or satin finish
Outer Diameter: Varies slightly by manufacturer; typically around 160–180 mm
Depth: Approximately 50–60 mm
Shape: Circular or oval, depending on design preference
Sterilization: Fully autoclavable and compatible with chemical disinfectants
Usage: Suitable for holding dressings, disinfectants, instruments, and liquids during medical procedures
Durability: High – resists dents, corrosion, and wear from frequent cleaning and sterilization
Length: 14.5 cm (145 mm)
Blade Design: Curved blades with blunt lower tip and angled cutting edge
Tip Type: One blunt (lower) and one sharp (upper)
Material: Brushed surgical-grade stainless steel
Finish: Brushed/matte finish for low reflectivity and better grip
Handle Type: Ring handle for precision control and comfort
Hinge: Box joint or rivet, smooth gliding for precision cutting
Use Case: Surgical episiotomy, perineal incisions, perineal tissue trimming
Sterilization: Fully autoclavable (134°C), compatible with chemical sterilant
Reusability: High retains cutting performance and alignment after multiple uses
Target Users: Obstetricians, gynecologists, midwives, labor and delivery nurses
Design: Double Ended
Material: Stainless Steel (Surgical grade)
Blade Type: Two differently sized blades at either end for flexibility
Edge Design: Smooth, rounded, atraumatic edges
Surface Finish: Satin or mirror polish
Sterilization: Fully autoclavable and suitable for chemical sterilant
Application: Vaginal and cervical examination, minor gynecological procedures
Type: Straight
Length: 140 mm (14 cm)
Material: Stainless Steel (Surgical grade)
Jaw Design: Straight, serrated inner jaws
Locking Mechanism: Box lock with ratchet locking system
Handle Type: Finger ring handles
Finish: Matte or mirror polish
Sterilization: Fully autoclavable, compatible with standard hospital sterilization protocols
Use: Clamping blood vessels, holding tissues, or surgical materials during procedures
Frame Material: Stainless Steel (SS)
Frame Structure: Four-leg design with tie plate for stability
Frame Tubing: 25.44 mm x 1.2 mm SS tube
Basin Support Tubing: 12.7 mm x 1.02 mm SS tube
Basin Compatibility: Suitable for 350 mm diameter basin bowl
Dimensions (Approx.): Height: 820 mm × Width: 440 mm
Finish: Polished or satin
Use: Medical/surgical procedures, dressing rooms, and instrument cleaning
Compliance: complies with ISO 9001 and OHSAS 18001 standards
Sterilization: Wipe-down and chemical disinfection compatible
Type: Straight
Blade Type: Sharp cutting edges (blunt or pointed tips)
Material: Stainless Steel
Length: ranges from 14 cm to 16 cm
Use: Cutting gauze, dressings, and medical textiles
Sterilization: Fully autoclavable
Finish: Polished or satin finish for easy cleaning
Design: Ring handle (scissor-style) for precision and control
Material: Durable medical-grade plastic
Shape: Kidney-shaped ergonomic design
Dimensions: Approximately 20 cm (length) x 15 cm (width) x 4 cm (height)
Capacity: Approximately 500 ml
Weight: Lightweight for easy handling
Use: Holding surgical instruments, dressings, biological waste, and fluids during medical procedures
Sterilization: Disposable or autoclavable
Color: available in clear, blue, or green
Length: 6 inches (approximately 150 mm)
Material: Stainless Steel
Tip Type: Toothed for enhanced grip on tissues
Design: Straight or slightly curved
Sterilization: Fully autoclavable
Finish: Polished or satin
Use: Tissue handling and dissection in surgical procedures
Material: Stainless steel
Frequency ranges available (price varies a little based on frequency range):
DR-TFK- 128: 128 Hz – low frequency, used for neurological vibration tests
DR-TFK-256: 256 Hz – mid-frequency for combined neurological and audiological assessments
DR-TFK-512: 512 Hz – standard frequency for most audiological and neurological examinations
Frequency marking: Clearly engraved or printed on each fork
Design: Traditional two-pronged fork with a handle for easy striking
Use:
Audiometry (hearing evaluation)
Neurological exams (vibratory sensation testing)
Bone conduction testing
Diagnostic screening of peripheral neuropathies and nerve injuries
Design: Curved
Material: Stainless Steel
Jaw Type: Serrated, curved
Locking Mechanism: Ratchet lock
Handle: Ring handle (scissor-style)
Size: 140 mm to 200 mm
Sterilization: Fully autoclavable
Finish: Satin or polished
Use: Clamping blood vessels, tissue manipulation, and hemostasis during surgery
Design: Blunt, Curved on Flat
Size: 160 mm (16 cm)
Material: Stainless Steel
Tip Type: Blunt ends for safety
Blade Design: Curved on flat for smooth cutting on a flat surface
Handle: Ring handle (scissor-style)
Sterilization: Fully autoclavable
Finish: Polished or satin
Use: Cutting the umbilical cord safely and cleanly during childbirth
Design: Straight, Spring-Action
Size: 160 mm (16 cm)
Material: Stainless Steel
Tip Type: Serrated for secure grip
Mechanism: Spring tension (non-ratcheted)
Sterilization: Fully autoclavable
Finish: Polished or matte
Use: Dressing wounds, handling sterile materials, minor surgical tasks
Design: Straight
Size: 160 mm (16 cm)
Material: Stainless Steel
Jaw Type: Serrated for enhanced grip
Locking Mechanism: Ratchet lock system
Handle: Ring handle (scissor-style)
Sterilization: Fully autoclavable
Finish: Satin or polished
Use: Hemostasis, tissue holding, and clamping in surgical procedures
Design: Straight
Size: 17 cm
Material: Stainless Steel
Jaw Type: Serrated with cross-hatched pattern for secure needle grip
Locking Mechanism: Ratchet lock
Handle: Ring handle (scissor-style)
Sterilization: Fully autoclavable
Finish: Matte or polished
Use: Holding surgical needles during suturing
Design: Straight
Size: 8′
Material: Stainless Steel
Jaw Type: Serrated for secure grip
Handle: Spring-action, scissor-style
Sterilization: Fully autoclavable
Finish: Polished or matte
Use: Handling sterile instruments and materials in surgical settings
Size: 260 mm (26 cm)
Material: Stainless Steel
Blade Design: Single, curved blade
Handle: Ergonomic, solid grip
Sterilization: Fully autoclavable
Finish: Polished or satin
Use: Tissue retraction in gynecological and rectal procedures
Dimensions: 310 mm x 195 mm x 63 mm
Material: Stainless Steel (SS)
Cover: Included, matching stainless steel lid
Finish: Smooth, polished surface
Sterilization: Fully autoclavable
Shape: Rectangular with rounded edges
Use: For holding medical/dental instruments and dressing materials
Material: Medical-grade stainless steel
Tip diameter: 0.6 mm
Type: Single end
Handle: Textured for enhanced grip
Sterilization: Fully autoclavable
Weight: Lightweight for improved handling
Length: Standard instrument length
Tip: Fine-pointed, straight or slightly curved
Advantages:
| Model | Capacity | Inner Dimensions | Tray | Gross Dimension / Weight |
| DR T2FL AC01 | 16 L | 230 x 400 mm | 2 trays | 870 x 840 x 740 mm / 81.4 kg |
| DR T2FL AC02 | 22 L | 250 x 450 mm | 3 trays | 840 x 810 x 740 mm / 81.4 kg |
| Model | Working Chamber Size / Capacity |
| DR T2FL AC A1 | 300 x 500 mm / 35 L |
| DR T2FL AC A2 | 400 x 600mm / 75 L |
Specifications:
| MODEL | DR HPS LC50 | DR HPS LC 110 | DR HPS LC135 | DR HPS 16053 |
| Chamber volume | 50 Ltr. | 110 Ltr. | 135 Ltr. | 160 Ltr. |
|
CODE
|
APPROX. CAPACITY
|
DIMENSIONS (LxBxH)
|
TRAY DIMENSIONS (LxBxH)
|
|
DR ACS IS01
|
5.5 Lit.
|
300 x 150 x 125mm
|
245 x 125 x 25mm
|
|
DR ACS IS02
|
12.0 Lit.
|
430 x 200 x 150mm
|
355 x 180 x 25mm
|
|
DR ACS IS03
|
15.0 Ut.
|
510 x 200 x 150mm
|
435 x 180 x 25mm
|
|
CODE
|
APPROX. CAPACITY
|
DIMENSIONS (LxBxH)
|
|
DR ACS IS NEE01
|
2.0 Lit
|
200 x 125 x 80mm
|
|
DR ACS IS NEE02
|
2.5 Lit.
|
250 x 125 x 80mm
|
|
DR ACS IS NEE03
|
4.5 Lit.
|
300 x 150 x 100mm
|
|
DR ACS IS NEE04
|
5.2 Lit.
|
350 x 150 x 100mm
|
|
DR ACS IS NEE05
|
6.0 Lit.
|
400 x 150 x 100mm
|
|
DR ACS IS NEE06
|
12.0 Lit.
|
400 x 200 x 150mm
|
|
DR ACS IS NEE07
|
13.5 Lit.
|
450 x 200 x 150mm
|
|
DR ACS IS NEE08
|
15.0 Lit.
|
500 x 200 x 150mm
|
|
CODE
|
APPROX. CAPACITY
|
DIMENSIONS (LxBxH)
|
|
DR ACS IS EE01
|
2.7 Lit.
|
200 x 125 x 115mm
|
|
DR ACS IS EE02
|
3.5 Lit.
|
250 x 125 x 115mm
|
|
DR ACS IS EE03
|
6.2 Lit.
|
300 x 150 x 140mm
|
|
DR ACS IS EE04
|
7.2 Lit.
|
350 x 150 x 140mm
|
|
DR ACS IS EE05
|
8.0 Lit.
|
400 x 150 x 140mm
|
|
DR ACS IS EE06
|
17.0 Lit.
|
450 x 200 x 190mm
|
|
DR ACS IS EE07
|
19.0 Lit.
|
500 x 200 x 190mm
|
|
CODE
|
APPROX. CAPACITY
|
DIMENSIONS (LxBxH)
|
|
DR ACS IS ETE01
|
6.0 Lit.
|
300 x 150 x 140mm
|
|
DR ACS IS ETE02
|
7.0 Lit.
|
350 x 150 x 140mm
|
|
DR ACS IS ETE03
|
8.0 Lit.
|
400 x 150 x 140mm
|
|
DR ACS IS ETE04
|
17.0 Lit.
|
450 x 200 x 190mm
|
|
DR ACS IS ETE05
|
19.0 Lit.
|
500 x 200 x 190mm
|
| Model | Chamber Size | External Dimension in mm | Trays | Gross Dimension / Weight |
| DR ACS DA 01 | 250 mm x 450 mm | 500 x 650 x 430 | 3 | 770 x 570 x 520 mm / 54 kg |
| Model | Chamber Size | External Dimension in mm | Gross Dimension / Weight |
| DR ACS DA B01 | 310 x 600 | 580 x 730 x 655 | 630 x 815 x 725 mm / 115 kg |
| S.NO. | ||||
|---|---|---|---|---|
| 1 | DR VAC HM 3WD75 | Vertical, Triple Walled, Basic with Drying System | 400 Dia x 600 H | 75 Ltr |
| 2 | DR VAC HM 2W75 | Vertical, Double Walled, Basic | 400 Dia x 600 H | 75 Ltr |
| 3 | DR VAC HM 2W35 | Vertical, Double Walled, Basic | 300 Dia x 500 H | 35 Ltr |
| S.NO. | ||||
|---|---|---|---|---|
| 1 | DR VAC HM 3WST75 | Vertical, High Pressure, Triple Walled, Steam Storage with PLC Controlled Temperature, Low Water Cut-off, Timer,Alarm | 400 Dia x 600 H | 75 Ltr |
| 2 | DR VAC HM 3WS75 | Vertical, High Pressure, Triple Walled, Steam Storage with PLC Controlled Temperature, Low Water Cut-off | 400 Dia x 600 H | 75 Ltr |
| Model | DR 42M HAC 234U | DR 42M HAC 432U | DR 42M HAC 540U | DR 42M HAC 648U | DR 42M HAC 864U |
| DR 42M HAC 234T | DR 42M HAC 432T | DR 42M HAC 540T | DR 42M HAC 648T | DR 42M HAC 864T | |
| Capacity (L) | 324 | 432 | 540 | 648 | 864 |
| Chamber Dim (mm) | 600 x 600 x 900 | 600 x 600 x 1200 | 600 x 600 x 1500 | 600 x 900 x 1200 | 600 x 900 x 1600 |
| Door | Single Door – for models ending with ‘U’
Double Door – for models ending with ‘T’ |
||||
| Max Operating Parameters | 206.8 kPA (30 psi) / 135˚C / Vacuum | ||||
| S.NO. | ||||
|---|---|---|---|---|
| 1 | DR M4 CAC S150 | Horizontal Cylindrical Automatic Single Door | 400 Dia x 1200 L | 150 Ltr |
| 2 | DR M4 CAC D150 | Horizontal Cylindrical Automatic Double Door | 400 Dia x 1200 L | 150 Ltr |
| 3 | DR M4 CAC S175 | Horizontal Cylindrical Automatic Single Door | 500 Dia x 900 L | 175 Ltr |
| 4 | DR M4 CAC D175 | Horizontal Cylindrical Automatic Double Door | 500 Dia x 900 L | 175 Ltr |
| 5 | DR M4 CAC S235 | Horizontal Cylindrical Automatic Single Door | 500 Dia x 1200 L | 235 Ltr |
| 6 | DR M4 CAC D235 | Horizontal Cylindrical Automatic Double Door | 500 Dia x 1200 L | 235 Ltr |
| 7 | DR M4 CAC S340 | Horizontal Cylindrical Automatic Single Door | 600 Dia x 1200 L | 340 Ltr |
Specifications:
Filtration efficiency: ≥ 95% for particles ≥ 0.3 microns (NIOSH certified)
Material: Non-woven polypropylene with melt-blown filter layer
Fit type: Cup-style or foldable (vertical or horizontal)
Nosepiece: Adjustable aluminum or plastic strip
Strap type: Elastic headbands (overhead)
Sterility: non-sterile or sterile
Size: Standard adult fit
Specifications:
Material: Natural rubber latex
Thickness: ~0.08 mm to 0.12 mm (varies by model)
Length: ~240 mm (standard)
Sizes: Small, Medium, Large, Extra Large
Powder content: Powdered or powder-free
Sterility: Sterile or non-sterile
Specifications:
Material: Synthetic nitrile rubber
Thickness: 0.05 mm to 0.13 mm (varied by model)
Length: ~240 mm (standard)
Sizes: Small, Medium, Large, Extra Large
Powder content: Powder-free
Sterility: Sterile or non-sterile (based on application)
Shelf life: Up to 5 years (stored in cool, dry conditions)
Height Adjustment Range (Hi-Lo): 450 mm – 750 mm
Backrest Angle: 0° – 75° (manual crank)
Knee Rest Angle: 0° – 35° (manual crank)
Trendelenburg: 0° – 12° (manual)
Reverse Trendelenburg: 0° – 12° (manual)
Platform Sections: 4-section perforated MS platform
Frame Material: CRCA steel with epoxy powder coating
Head & Foot Panels: ABS, detachable
Side Rails: Collapsible, aluminum or ABS
Crank System: 3 separate crank handles (backrest, knee rest, Hi-Lo)
Safe Working Load: 200 – 250 kg
| Dome Head | One (4 Fins) |
| Halogen Bulbs/No. of LEDS | 84 Nos. (21 in each) |
| Illumination Intensity at 1m | 130000 ± 10% Lux |
| Color Temperature | 4000 – 5000k |
| Control Unit | Touch and Remote |
| Battery Backup (optional) | Optional |
| Size of light Field | 12-30 cm |
| LED life | >50000 HRS |
| Diameter of light | 500mm |
| Focusing | Adjustable |
| Power Supply | 200V/50Hz AC |
| Dome Head | One (4 Fins) |
| Halogen Bulbs/No. of LEDS | 76 Nos. (19 in each) |
| Illumination Intensity at 1m | 100000 ± 10% Lux |
| Color Temperature | 4000 – 5000k |
| Control Unit | Touch and Remote |
| Battery Backup (optional) | Optional |
| Size of light Field | 12-30 cm |
| LED life | >50000 HRS |
| Diameter of light | 500mm |
| Focusing | Adjustable |
| Power Supply | 200V/50Hz AC |
| Dome Dia. | 500mm |
| Lux Intensity | 50,000 ± 10% Lux |
| Halogen Bulb | 24V x 150W |
| Dome Dia. | 500mm |
| Lux Intensity | 40,000 ± 10% Lux |
| Halogen Bulb | 24V/70W X 5 |
| Dome Dia. | 700mm |
| Lux Intensity | 1,00,000 ± 10% Lux |
| Halogen Bulb | 24V x 70 W x 7 Nos. |
| Dome Dia. | 500mm |
| Lux Intensity | 50,000 ± 10% Lux |
| Halogen Bulb | 24V/150W |
| Halogen Bulbs/No. of LEDS | 16 Nos. |
| Total No. of LEDS | 80 Nos. + 48 Nos. |
| Illumination Intensity at 1m | 1,80,000 ± 10% Lux |
| Height Adjustment | Yes |
| Color Temperature | 4000 – 5000k |
| Control Unit | Touch and Remote |
| Battery Backup (optional) | 2 hours standard |
| Colour Combination | White and Yellow |
| Colour Reduction Index | 93RA |
| Diameter of light | 150mm |
| Power light | 220V/50Hz |
| LED Light Colour Combination | White and Yellow |
| Halogen Bulbs/No. of LEDS | 19 nos. |
| Total No. of LEDS | 76 Nos. + 57 Nos. |
| Illumination Intensity at 1m | 1,50,000 ± 10% Lux |
| Height Adjustment | Yes |
| Color Temperature | 4000 – 5000k |
| Control Unit | Touch and Remote |
| Battery Backup (optional) | 2 hours standard |
| Colour Combination | White and Yellow |
| Colour Reduction Index | 93RA |
| Diameter of light | 150mm |
| Power light | 220V/50Hz |
| LED Light Colour Combination | White and Yellow |
Model No: DR-STZ-SS
Type of Product: Instrument Sterilizer
Size: 30.48×20.32×15.24 cm
Material: Stainless Steel
Application: Hospital, Laboratory, Clinics
Power: 2KW
Voltage: 220 v
Color: Silver
Specifications:
Light source: Compact Fluorescent Lamps (CFL), blue light (wavelength ~420–480 nm)
Number of lamps: typically 6–8 on top and 4–6 at the base
Irradiance: ≥ 30–40 µW/cm²/nm (varies by model)
Cradle size: Suitable for standard neonatal dimensions
Power supply: 220–240 V, 50/60 Hz
Height adjustment range: ~100–150 mm
Structure: Powder-coated metal or stainless steel frame
Controls: On/off switches, timers, optional intensity control
Specifications:
Light source: CFL or LED (blue light, 420–480 nm)
Number of lamps: typically 4–6 CFL or an LED array
Irradiance: ≥ 30 µW/cm²/nm at recommended distance
Height adjustment range: ~100–150 mm
Power supply: 220–240 V, 50/60 Hz
Timer: Digital or analog (up to 99 hours)
Frame: Powder-coated or stainless steel stand
Cradle compatibility: Fits standard neonatal beds or bassinets
Specifications:
Heating source: Quartz or ceramic radiant heater
Temperature control: Servo and manual modes
Skin temperature range: 34°C to 39°C (adjustable)
Display: LED or LCD for temperature and alarms
Power supply: 220–240 V, 50/60 Hz
Heater tilt adjustment: ~0° to 90° (manual)
Safety: Audio-visual alarms, automatic cutoff, thermal fuse
Frame: Epoxy-coated or stainless steel structure
Specifications:
Temperature control range: 30°C to 38°C (servo and manual modes)
Humidity control: Up to 80% RH (adjustable, model-dependent)
Chamber material: Transparent, medical-grade acrylic
Heating method: Forced air circulation with uniform heat distribution
Display: Digital LED or LCD for temperature, humidity, and system status
Alarms: Over/under temperature, system error, sensor disconnection
Power supply: 220–240 V, 50/60 Hz
Optional features: In-built phototherapy unit, battery backup, X-ray cassette tray
Specifications:
Frame material: Mild steel with epoxy powder coating or stainless steel
Bed top: Solid or perforated CRC sheet/mesh platform
Overall dimensions: Approx. 1400–1600 x 600–700 x 600–750 mm
Side rails: Fixed or collapsible, full-length
Headrest/footrest: Optional manual adjustment
Mattress: Foam mattress with waterproof cover (optional)
Base: Anti-skid rubber shoes and/or lockable smooth-rolling castors
Load capacity: Up to 100–120 kg
Finish: Epoxy powder coated or polished stainless steel
Weight: Approx. 35–50 kg
Specifications:
Frame material: Mild steel with epoxy powder coating
Bassinet: Transparent acrylic, curved and enclosed
Mattress: Soft foam with waterproof, washable cover
Overall dimensions: Approx. 850–900 x 450–500 x 850 mm (L x W x H)
Storage: Utility tray/shelf at the base
Castors: 4 smooth-rolling castors, 2 with locking mechanism
Load capacity: Up to 15–20 kg
Finish: High-quality epoxy powder coated frame
Weight: Approx. 12–18 kg
Specifications:
Frame material: Mild steel or stainless steel with epoxy powder coating
Cradle bed: Wire mesh or perforated sheet with gentle contours
Mattress: Soft foam with waterproof, washable cover
Overall dimensions: Approx. 800–900 x 450 x 900 mm (L x W x H)
Rocking: Manual rocking mechanism (optional locking feature)
Base: Anti-skid rubber shoes and/or lockable smooth-rolling castors
Load capacity: Up to 15–20 kg
Finish: Epoxy powder coated or polished stainless steel
Weight: Approx. 10–15 kg
Specifications:
Frame material: Mild steel or stainless steel with epoxy powder coating
Upholstery: Medical-grade rexine or synthetic leather
Mattress thickness: Approx. 50–75 mm
Overall dimensions: Approx. 1800 x 600 x 800 mm
Backrest adjustment: Up to approx. 70°
Leg supports: Adjustable padded lithotomy crutches or stirrups
Base: Anti-skid rubber shoes and/or lockable smooth-rolling castors
Load capacity: Up to 150–180 kg
Finish: Epoxy powder coated or polished stainless steel
Weight: Approx. 40–60 kg
Specifications:
Frame material: Mild steel with epoxy powder coating
Upholstery: Medical-grade synthetic leather or rexine, waterproof and easy to clean
Mattress thickness: Approx. 75–100 mm
Overall dimensions: Approx. 1800–2000 x 600–700 mm
Backrest adjustment: Up to approx. 70°
Leg section: Detachable and adjustable
Lithotomy poles: Height and angle adjustable with padded leg holders
Base: Equipped with anti-skid rubber shoes and/or lockable smooth-rolling castors
Load capacity: Up to 150–180 kg
Finish: High-quality epoxy powder coated
Weight: Approx. 65–85 kg
Specifications:
Frame material: Heavy-duty mild steel or stainless steel with epoxy powder coating
Upholstery: Medical-grade synthetic leather or rexine, water- and stain-resistant
Mattress thickness: Approx. 75–100 mm
Overall dimensions: Approx. 1800–2000 x 600–700 mm
Height adjustment range: Approx. 600–900 mm (hydraulic lift)
Backrest adjustment: Up to approx. 70°
Leg section: Adjustable/detachable
Lithotomy poles: Adjustable with padded leg supports
Base: Anti-skid rubber shoes and/or lockable smooth-rolling castors
Load capacity: Up to 180 kg
Finish: Epoxy powder coated or polished stainless steel
Weight: Approx. 80–100 kg
Specifications:
Frame material: Mild steel or stainless steel with epoxy powder coating
Upholstery: Synthetic leather or rexine, water- and stain-resistant
Mattress thickness: Approx. 50–75 mm
Overall dimensions (open): Approx. 1800 x 600 x 800 mm
Folded dimensions: Approx. 900 x 600 x 300 mm
Headrest and leg section: Manually adjustable
Sections: Three-section top (headrest, main, leg section)
Base: Anti-skid rubber shoes and/or lockable smooth-rolling castors
Load capacity: Up to 150 kg
Finish: Epoxy powder coated or polished stainless steel
Weight: Approx. 30–45 kg
Specifications:
Material: Stainless Steel
Upholstery: Synthetic leather or rexine, waterproof and stain-resistant
Mattress thickness: Approx. 50–75 mm
Overall dimensions: Approx. 1800 x 600 x 800 mm
Top section: Fixed cushioned surface
Base: Anti-skid rubber shoes and/or lockable smooth-rolling castors
Load capacity: Up to 150–180 kg
Finish: Polished or matte stainless steel
Weight: Approx. 40–60 kg
Specifications:
Frame material: Mild steel or stainless steel with epoxy powder coating
Upholstery: High-grade synthetic leather or rexine, water- and stain-resistant
Mattress thickness: Approx. 75–100 mm
Overall dimensions: Approx. 1800–1900 x 600–700 x 800 mm
Backrest adjustment: Up to approx. 70°
Leg section adjustment: Manually adjustable
Storage: Optional drawers or cabinets integrated into base
Base: Anti-skid rubber shoes and/or lockable smooth-rolling castors
Load capacity: Up to 150–180 kg
Finish: Epoxy powder coated or polished stainless steel
Weight: Approx. 60–85 kg
Specifications:
Frame material: Mild steel or stainless steel with epoxy powder coating
Upholstery: Synthetic leather or rexine, easy to clean and disinfect
Mattress thickness: Approx. 50–75 mm
Overall dimensions (open): Approx. 1800 x 500–600 x 800 mm
Folded dimensions: Approx. 900 x 500–600 x 250 mm
Backrest adjustment: Manually adjustable up to approx. 70°
Base: Anti-skid rubber shoes and/or lockable smooth-rolling castors
Load capacity: Up to 120–150 kg
Finish: Epoxy powder coated or polished stainless steel
Weight: Approx. 25–40 kg
Specifications:
Frame material: Mild steel or stainless steel with epoxy powder coating
Top section: Single, fixed cushioned surface
Upholstery: Rexine or synthetic leather, water- and stain-resistant
Mattress thickness: Approx. 50 mm
Overall dimensions: Approx. 1800 x 500 x 800 mm
Base: With anti-skid rubber shoes and/or lockable castors
Load capacity: Up to 120–150 kg
Finish: Epoxy powder coated or polished stainless steel
Weight: Approx. 25–35 kg
Specifications:
Frame material: Mild steel or stainless steel with epoxy powder coating
Upholstery: Water-resistant, stain-resistant synthetic leather or rexine
Overall dimensions: Approx. 1800 x 600 x 800 mm
Mattress: 50–75 mm thick foam padding
Backrest adjustment: Up to approx. 70°, manually operated
Storage: 2–3 drawers and 1–2 cabinet sections, depending on model
Base: Fitted with anti-skid rubber shoes and/or lockable castors
Load capacity: Up to 150–180 kg
Finish: Epoxy powder coated or polished stainless steel
Weight: Approx. 60–85 kg
Specifications:
Frame material: Mild steel or stainless steel with epoxy powder coating
Sections: Two-section top (main bed and detachable foot-end)
Mattress: Foam-padded, covered with waterproof synthetic material
Overall dimensions: Approx. 1800–2000 x 600–700 mm
Backrest adjustment: Up to approx. 70° via ratchet or gas spring
Lithotomy poles: Adjustable height and angle with padded supports
Base: Fitted with anti-skid rubber shoes and/or lockable castors
Load capacity: Up to 150–180 kg
Finish: Epoxy powder coated or polished stainless steel
Weight: Approx. 55–75 kg
Specifications:
Frame material: Mild steel or stainless steel with epoxy powder coating
Mattress sections: Three-section, foam-padded with waterproof cover
Overall dimensions: Approx. 1800–2000 x 600–700 mm
Height adjustment range: Approx. 600–850 mm
Backrest angle: Adjustable up to 70°
Leg section: Adjustable and/or detachable
Lithotomy poles: Height and angle adjustable with padded supports
Base: With anti-skid rubber shoes and/or lockable castors
Load capacity: Up to 150–180 kg
Finish: Epoxy powder coated or stainless steel polished
Weight: Approx. 60–80 kg
Features:
High-brightness LED light source for uniform and flicker-free illumination
Slim and lightweight design with minimal heat generation
Energy-efficient with long-lasting LED life (up to 50,000 hours)
Acrylic viewing panel for clear and distortion-free image display
Suitable for single or multiple film viewing (1, 2, or 3 panels)
Wall-mounted or desktop use for versatile installation
Instant start with no warm-up time
Low maintenance and noise-free operation
Available with both anti-skid rubber feet and smooth-rolling castor stand (optional for mobile versions)
Ideal for hospitals, diagnostic centers, and radiology departments
Specifications:
Frame material: Powder-coated or stainless steel
Seat material: Padded PU or plastic with hygiene cut-out
Commode pan: Removable plastic or stainless steel
Seat height: Adjustable, approx. 450–550 mm
Overall dimensions: Approx. 550 x 450 x 850 mm
Load capacity: Up to 120–150 kg
Base: With anti-skid rubber shoes and/or smooth-rolling castors (optional)
Foldable: Available in foldable and non-foldable versions
Weight: Approx. 6–10 kg
Finish: Epoxy powder-coated or polished stainless steel
Specifications:
Basin material: Stainless Steel
Basin diameter: Approx. 350 mm
Basin depth: Approx. 100–150 mm
Stand material: Stainless steel tubular frame
Overall height: Approx. 800–900 mm
Base: 3-legged with anti-skid rubber shoes and optional smooth-rolling castors
Finish: Polished or matte stainless steel
Weight: Approx. 4–6 kg
Specifications:
Basin material: Stainless Steel (Grade 304 or equivalent)
Basin diameter (each): Approx. 350 mm
Basin depth: Approx. 100–150 mm
Stand material: Stainless steel tubular frame
Overall height: Approx. 800–900 mm
Base: Four-legged with anti-skid rubber shoes or smooth-rolling castors
Finish: Polished or matte stainless steel
Weight: Approx. 6–8 kg
Specifications:
Basin material: Stainless Steel
Basin diameter: Approx. 350 mm
Basin depth: Approx. 100–150 mm
Stand material: Stainless steel tubular frame
Overall height: Approx. 800–900 mm
Base: Four-legged with anti-skid rubber shoes or smooth-rolling castors
Finish: Polished or matte stainless steel
Weight: Approx. 4–6 kg
Specifications:
Bowl material: Stainless Steel
Bowl diameter: Approx. 350 mm
Bowl depth: Approx. 100–150 mm
Frame: Stainless steel tubular stand
Height from floor: Approx. 300–400 mm
Base: Rubber-tipped legs for stability or smooth-rolling castors
Finish: Polished or matte stainless steel
Weight: Approx. 2–4 kg
Specifications:
Material: Stainless Steel
Step size (each): Approx. 400 x 250 mm
Step height: Lower step approx. 150 mm, upper step approx. 300 mm
Load capacity: Up to 120–150 kg
Leg support: Four-legged with non-slip rubber shoes
Tread surface: Anti-skid stainless steel or rubber-coated sheet
Finish: Matte or polished stainless steel
Weight: Approx. 5–7 kg
Specifications:
Frame material: Mild steel with epoxy powder coating
Step size (each): Approx. 400 x 250 mm
Step height: Lower step approx. 150 mm, upper step approx. 300 mm
Load capacity: Up to 120–150 kg
Leg support: Four-legged with anti-slip rubber shoes
Tread surface: Anti-skid rubber mat or textured sheet on both steps
Finish: Epoxy powder coated in standard colors (black, grey, etc.)
Weight: Approx. 5–7 kg
Specifications:
Material: Stainless Steel
Step size: Approx. 400 x 250 mm
Step height: Approx. 200–250 mm
Load capacity: Up to 120–150 kg
Leg support: Four-legged with non-slip rubber shoes
Top surface: Anti-skid stainless steel or rubber-coated sheet
Finish: Matte or polished stainless steel
Weight: Approx. 3–5 kg
©2025-26. All Rights Reserved. Shresha Biortek
